1M1: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(template, cat)
(cat)
Line 9: Line 9:
manuals=
manuals=
* [http://bama.edebris.com/manuals/tek/tu7 1M1 / TU-7 / 067-0521-00 manual on BAMA]
* [http://bama.edebris.com/manuals/tek/tu7 1M1 / TU-7 / 067-0521-00 manual on BAMA]
[[Category:500 series plugins]]
[[Category:Calibration fixtures]]
}}
}}
The '''Tektronix [[TU-7]]/1M1/[[067-0521-00]]''' is a [[Letter-series_and_1-series_plug-ins|letter series plug-in]]  
The '''Tektronix [[TU-7]]/1M1/[[067-0521-00]]''' is a [[Letter-series_and_1-series_plug-ins|letter series plug-in]]  
Line 25: Line 27:
It does not have the Type P's short operating life, because it does not use a [[mercury switch]].
It does not have the Type P's short operating life, because it does not use a [[mercury switch]].


This instrument went through several names.   
This instrument went through several names.  At its [[introduced in 1964|1964]] introduction, it was the '''TU-7'''.   
At its [[introduced in 1964|1964]] introduction, it was the TU-7.   
Some early Tek-internal instruments for design, manufacturing, and calibration had TU (Test Unit) nomenclature.   
Some early Tek-internal instruments for design, manufacturing,  
and calibration had TU (Test Unit) nomenclature.   
(Other examples include the TU-?? Variac, the TU-?? dim-bulb fixture, and the [[TU-50]] sine/square/pulse generator.)   
(Other examples include the TU-?? Variac, the TU-?? dim-bulb fixture, and the [[TU-50]] sine/square/pulse generator.)   
In 1965 it was renamed Type 1M1 to fit into the letter-series nomenclature like its predecessor.   
 
Later still, the 067- calibration fixture naming system took hold and it was rechristened 067-0521-00.   
In 1965, it was renamed '''Type 1M1''' to fit into the letter-series nomenclature like its predecessor.   
The instrument was also revised once - more pulse frequencies - and the name upgraded to 067-0521-01.  
Later still, the 067- calibration fixture naming system took hold and it was rechristened '''067-0521-00'''.   
It does not appear - under any name - in any Tek catalog,  
 
but the 1964 catalog <u>does</u> list a cousin: Type [[10/11M1]], for the [[647|Type 647]] scope.
The instrument was also revised once - more pulse frequencies - and the name upgraded to '''067-0521-01'''.  
 
It does not appear - under any name - in any Tek catalog, but the 1964 catalog <u>does</u> list a cousin:  
Type [[10/11M1]], for the [[647|Type 647]] scope.


==Pictures==
==Pictures==
Line 44: Line 47:
File:Tek 1m1 left.jpg
File:Tek 1m1 left.jpg
<gallery/>
<gallery/>
[[Category:500 series plugins]]

Revision as of 10:46, 20 August 2014

Template:Plugin Sidebar 2 The Tektronix TU-7/1M1/067-0521-00 is a letter series plug-in used for calibrating 500-series scopes.

It is a multifunction replacement for the Type P Pulser, the TU-2 Test Load, and the EP-53 Gain Set Adaptor.

It is used for calibrating the mainframe's step response and gain, checking dual-trace operation, common mode rejection, and power supply regulation.

(500-series mainframes are designed to have 10 div/Volt response to differential signals from the plug-in, and zero response to common-mode signals.)

It contains a transistor multivibrator, whose output is sharpened through Tek-made Gallium-Arsenide diodes (later production used silicon), a dual-trace circuit using 12AT7 and 6AL5 tubes, and various load resistors. It does not have the Type P's short operating life, because it does not use a mercury switch.

This instrument went through several names. At its 1964 introduction, it was the TU-7. Some early Tek-internal instruments for design, manufacturing, and calibration had TU (Test Unit) nomenclature. (Other examples include the TU-?? Variac, the TU-?? dim-bulb fixture, and the TU-50 sine/square/pulse generator.)

In 1965, it was renamed Type 1M1 to fit into the letter-series nomenclature like its predecessor. Later still, the 067- calibration fixture naming system took hold and it was rechristened 067-0521-00.

The instrument was also revised once - more pulse frequencies - and the name upgraded to 067-0521-01.

It does not appear - under any name - in any Tek catalog, but the 1964 catalog does list a cousin: Type 10/11M1, for the Type 647 scope.

Pictures

<gallery> Image:067-0521-00 1.JPG File:Tek 1m1 front.jpg File:Tek 1m1 right.jpg File:Tek 1m1 left.jpg