2212: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 40: Line 40:
[[Category:Digital storage scopes]]
[[Category:Digital storage scopes]]


[[Category:Image needed]]


[[Category:Parallel printer interface]]
[[Category:Parallel printer interface]]

Revision as of 06:42, 15 April 2016

{{{manufacturer}}} 
60 MHz dual channel analog/digital oscilloscope
Tektronix 2212 image needed

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen cursors. It has a switch which selects between the two modes. In analog mode, the vertical signal path is all analog, from the BNC input connector to the electrostatic deflection plates of the CRT.

Other signals such as the trigger level are controlled by the internal computer in both modes. In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms. The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz. The bandwidth in digital mode is considerably lower. There is a DB-25 connector on the rear panel for connecting a parallel-port printer. It prints correctly to an Epson-compatible printer and allows some customization of what is on the screen. The 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates.

Manual needed. (schematics)

Specifications

  • Bandwidth: 60 MHz (non-storage), 10 MHz (storage)
  • Sampling Rate:
  • ADC resolution: 8 bit
  • Memory: 4096 Samples
  • Deflection: 5 mV/Div – 5 V/Div in 1–2–5 sequence, 2 mV/Div bandwidth limited to 10 MHz
  • Input impedance: 1 MΩ || 20 pF
  • Interfaces: Parallel printer port (DB25), RS232C (optional), GPIB (optional)
  • Power: 85 W max.

Links

Pictures