2224: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (→‎top: clean up, replaced: {{Oscilloscope Sidebar | → {{Oscilloscope Sidebar | series=2200-series scopes |)
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The Tektronix 2224 is almost identical to the [[2232]], the differences being  
{{Oscilloscope Sidebar
some jumpers on the CPU board to tell the firmware which model it is and
|manufacturer=Tektronix
3 front panel buttons which have no actuators or holes on the 2224.  When
|series=2200-series scopes
working on a 2224, the [http://w140.com/mmm/tek-2232.pdf 2232 manual]
|model=2224
can be used for most purposes.
|summary=100 MHz digital/analog scope
|image=Tek 2224 front.jpg
|caption=Tek 2224
|introduced=(?)
|discontinued=(?)
|designers=
|manuals=
* [http://w140.com/mmm/tek-2232.pdf 2232 manual] applies mostly
<small>
'''Modifications '''
* [http://hakanh.com/dl/docs/kitinstructions/040-1344-00.pdf 040-1344-00 CRT Noise Reduction] (1991)
</small>
}}
The '''Tektronix 2224''' is similar to the [[2232]], the differences being  
* some jumpers on the CPU board to tell the firmware it is a 2224 rather than a 2232
* there are three front panel buttons on the 2232 which have no corresponding actuators or holes on the 2224
* the 2224 is a 60 MHz scope; the 2232 is 100 MHz.


Tektronix 2224 [[List_of_manuals_that_are_needed|manual needed]].
When working on a 2224,
the [http://w140.com/mmm/tek-2232.pdf 2232 manual] can be used for most purposes.


{{MissingSpecs}}


[[Category:2000 series scopes]]
==Links==
* [http://www.hakanh.com/dl/docs/troubleshooting_tips_on_2200_ps.pdf Troubleshooting tips on 2200 PSU]
 
==Pictures==
 
<gallery>
Tek 2224 front.jpg
Tek 2224 trace.jpg
Tek 2224 cursors.jpg
Tek 2224 internal top.jpg
Tek 2224 internal bottom.jpg
</gallery>
 
[[Category:2200 series scopes]]
[[Category:Digital storage scopes]]
[[Category:Digital storage scopes]]
[[Category:Manual needed]]

Revision as of 01:41, 11 August 2021

Tektronix 2224
100 MHz digital/analog scope
Tek 2224

Produced from (?) to (?)

Manuals

Modifications

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 2224 is similar to the 2232, the differences being

  • some jumpers on the CPU board to tell the firmware it is a 2224 rather than a 2232
  • there are three front panel buttons on the 2232 which have no corresponding actuators or holes on the 2224
  • the 2224 is a 60 MHz scope; the 2232 is 100 MHz.

When working on a 2224, the 2232 manual can be used for most purposes.

Key Specifications

  • please add

Links

Pictures