2230: Difference between revisions
No edit summary |
No edit summary |
||
| Line 34: | Line 34: | ||
The Cursor knob is prone to failure. It becomes jittery and will not scroll properly. | The Cursor knob is prone to failure. It becomes jittery and will not scroll properly. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{SpecGroup | Vertical}} | |||
{{Spec | Input impedance | 1 MΩ // 20 pF }} | |||
{{Spec | Maximum Safe Input Voltage | 400 V (dc + peak AC) or 800 V<sub>p-p</sub> AC}} | |||
{{Spec | CMRR | At least 10:1 at 10 MHz }} | |||
{{SpecGroup | Horizontal}} | |||
{{Spec | Timebase | 50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div}} | |||
{{Spec | Bandwidth | 100 MHz (analog) }} | {{Spec | Bandwidth | 100 MHz (analog) }} | ||
{{Spec | Sampling rate | 20 MS/s }} | {{Spec | Sampling rate | 20 MS/s }} | ||
{{Spec | Record length | 1K or 4K samples (single channel), optional 26K }} | {{Spec | Record length | 1K or 4K samples (single channel), optional 26K }} | ||
{{Spec | Z axis | input (intensity); DC to 5 MHz}} | |||
{{Spec | CRT | display area : 80 × 100 mm² }} | |||
{{Spec | Dimensions | With feet and handle: 137 x 361 x 511 mm³ }} | |||
{{Spec | Features | | {{Spec | Features | | ||
* X-Y operation | |||
* Pre/Post-triggering | * Pre/Post-triggering | ||
* Averaging | * Averaging | ||
| Line 45: | Line 57: | ||
* GPIB option | * GPIB option | ||
}} | }} | ||
{{EndSpecs}} | {{EndSpecs }} | ||
''please add'' | ''please add'' | ||
Revision as of 09:48, 7 March 2019
The Tektronix 2230 is a portable 100 MHz, dual-channel combination analog / digital storage scope, sister model of 2220 and 2221.
It has both an analog mode and a digital mode. In the digital storage mode, up to three waveform sets (CH 1 and/or CH 2) may be stored in a save ref. memory and recalled for display at a later time.
The 2230 features alphanumeric CRT readout of many of the front panel controls. It has a DB-9 auxiliary connector on the right side providing an external clock input as well as an output for an analog X-Y plotter to make permanent copies of the display. This feature can be accessed through the "Mem select" menu.
Some Firmware versions have a diagnostics menu with the Tektronix logo and wizard image.
The Cursor knob is prone to failure. It becomes jittery and will not scroll properly.
Key Specifications
| — Vertical — | |
| Input impedance | 1 MΩ // 20 pF |
| Maximum Safe Input Voltage | 400 V (dc + peak AC) or 800 Vp-p AC |
| CMRR | At least 10:1 at 10 MHz |
| — Horizontal — | |
| Timebase | 50 ns/Div to 5 s/Div, 1-2-5, x10 magnifier, i.e. down to 5 ns/Div |
| Bandwidth | 100 MHz (analog) |
| Sampling rate | 20 MS/s |
| Record length | 1K or 4K samples (single channel), optional 26K |
| Z axis | input (intensity); DC to 5 MHz |
| CRT | display area : 80 × 100 mm² |
| Dimensions | With feet and handle: 137 x 361 x 511 mm³ |
| Features |
|
please add
Links
Pictures
-
-
-
-
-
-
2230A Signal Input Board
-
2230 interface board
-
upper most board
