2246

From TekWiki
Revision as of 05:55, 15 October 2022 by Peter (talk | contribs)
Jump to navigation Jump to search
Tektronix 2246
100 MHz portable 4-channel scope
Tektronix 2246

Produced from 1987 to 1995

Manuals
ROM Images
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 2246 is a 100 MHz four-channel analog oscilloscope. Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.

The 2246 includes many of the same features of the 2245A and adds auto-tracking SmartCursors which track the selected measurement, trigger level, or ground. There are Labeled Volts Cursors with Ground-Referenced Readings and On-Screen Readouts; Hands-Off Voltmeter Measurements of DC Volts, +Peak and -Peak Volts, and P-P Volts; SmartCursors Integrate Voltage, Time, Frequency, and Phase Measurements, and are available in ALT and B Horizontal Modes.

Key Specifications

Bandwidth 100 MHz
Deflection CH 1, CH 2: 2 mV/div to 5 V/div (1–2–5); CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15%
Vertical Operating Modes CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input Impedance 1 MΩ ±1.0% // 20 pF ±1 pF
Maximum Input Voltage 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz)
Sweep Speeds A Time Base: 0.5 s/div to 20 ns/div (1–2–5); B Time Base: 5 ms/div to 20 ns/div (1–2–5, ×10 magnifier to 2 ns/div)
Trigger DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger Modes A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Trigger Source A & B Vert, CH1, 2, 3, 4, Line
Voltmeter DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, GND, Trigger Lvl
Cursors Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts
Interface Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector
Probes Two P6109 100 MHz ×10 probes, BNC connector with a readout pin
Power 90 − 250 VAC, 48 − 445 Hz, 100 W max.

Models

  • 2246
  • 2246 1Y
  • 2246 2R
  • 2246 Mod A
  • 2246A

See Also

Pictures


CRTs used in the 2246

Page Part nos Description Designers Used in
T4656 154-0905-00 CRT 2245A 2246 2246A

Custom ICs used in the 2246

Page Model Part nos Description Designers Used in
155-0322-00 M429 155-0322-00 vertical output amplifier 2245A 2246
156-2654-00 156-2654-00 156-2654-00 ECL "fast logic" 2245A 2246
156-2655-00 156-2655-00 156-2655-00 "slow logic" 2245A 2246
165-2154-00 165-2154-00 165-2154-00 buffer amplifier 2246
234-0203-20 M376-003 234-0133-20 234-0203-20 234-0238-20 amplifier 2245A 2246
234-0401-20 234-0401-20 234-0401-20 234-0401-21 horizontal preamplifier 2245A 2246
M376-004 M376-004 234-0204-20 234-0239-30 234-0239-31 trigger 2245A 2246