Page values for "2252"
"Products" values
1 row is stored for this page| Manufacturer | Tektronix |
| Model | 2252 |
| Class | Oscilloscope |
| Description | 100 MHz portable 4-channel scope |
| Introduced | 1991 |
| Discontinued | 1995 |
"Specifications" values
15 rows are stored for this page| Parameter | Bandwidth |
| Value | 100 MHz |
| Parameter | Deflection |
| Value | CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15% |
| Parameter | Vertical Operating Modes |
| Value | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) |
| Parameter | Input Impedance |
| Value | 1 MΩ ±1.0% // 20 pF ±1 pF |
| Parameter | Maximum Input Voltage |
| Value | 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz) |
| Parameter | Sweep Speeds |
| Value | A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div) |
| Parameter | Trigger |
| Value | DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field |
| Parameter | Trigger Modes |
| Value | A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) |
| Parameter | Trigger Source A & B |
| Value | Vert, CH1, 2, 3, 4, Line |
| Parameter | Voltmeter |
| Value | DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl |
| Parameter | Counter/Timer |
| Value | Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time |
| Parameter | Cursors |
| Value | Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts |
| Parameter | Interface |
| Value | Centronics Printers: Epson FX-Series (25-pin); GPIB connector; Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector |
| Parameter | Probes |
| Value | Two P6109 100 MHz ×10 probes, BNC connector with a readout pin |
| Parameter | Power |
| Value | 100 W max, 90 − 250 VAC, 48 − 445 Hz |