2252: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |
{{Oscilloscope Sidebar  
title=Tektronix 2252 |
|manufacturer=Tektronix
summary=100 MHz portable 4-channel scope |
|series=
image= Tek 2252 trace3.jpg |
|model=2252  
caption=Tektronix 2252 |
|summary=100 MHz portable 4-channel scope  
introduced=1989 |
|image= Tek 2252 trace3.jpg  
discontinued=1995 |
|caption=Tektronix 2252  
manuals=
|introduced=1991
* [[Media:070-7837-00.pdf|Tektronix 2252 Operators Manual (PDF)]]
|discontinued=1995  
|designers=
|manuals=
* [[Media:070-7838-00.pdf|Tektronix 2252 Service Manual]]
* [[Media:Tek_2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF)]]
* [[Media:Tek_2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF)]]
* [[Media:2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF, OCR, bad-OCR)]]
* [[Media:2252_2247A_2245A_Specs.pdf|Tektronix 2245A/2247A/2252 Specifications (PDF, OCR, bad-OCR)]]
Line 13: Line 16:
* [[Media:070-7837-00.pdf|Tektronix 2252 Operators Manual (PDF, OCR, bad-OCR ends at page 4-6)]]
* [[Media:070-7837-00.pdf|Tektronix 2252 Operators Manual (PDF, OCR, bad-OCR ends at page 4-6)]]
}}
}}
The '''Tektronix 2252''' is a 100 MHz four-channel analog oscilloscope with a built-in 200 MHz counter/timer.  Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.


The '''Tektronix 2252''' is a 100 MHz four-channel analog oscilloscope with a built-in 200 MHz counter/timer.
The 2252 includes the same features of the 2247A plus Push-Button Hardcopy Output, Centronics Interface, and Full GPIB programmability.
 
The 2252 is identical to the 2247A but with added functions of Push-Button Hardcopy Output on the front panel, and on the back panel a Centronics-compatible 25-pin connector for printing waveforms and a GPIB port for full programmability.
 
Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.
 
The 2252 also has advanced features like automatic setup, tracking cursors, integrated voltmeter and counter/timer functions, and can store/recall of 20 front panel setups.


{{BeginSpecs}}
{{BeginSpecs}}

Revision as of 15:05, 26 September 2022

Manuals – Specifications – Links – Pictures

The Tektronix 2252 is a 100 MHz four-channel analog oscilloscope with a built-in 200 MHz counter/timer. Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.

The 2252 includes the same features of the 2247A plus Push-Button Hardcopy Output, Centronics Interface, and Full GPIB programmability.

Key Specifications

Bandwidth 100 MHz
Deflection CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15%
Vertical Operating Modes CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input Impedance 1 MΩ ±1.0% // 20 pF ±1 pF
Maximum Input Voltage 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz)
Sweep Speeds A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div)
Trigger DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger Modes A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Trigger Source A & B Vert, CH1, 2, 3, 4, Line
Voltmeter DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl
Counter/Timer Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time
Cursors Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts
Interface Centronics Printers: Epson FX-Series (25-pin); GPIB connector; Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector
Probes Two P6109 100 MHz ×10 probes, BNC connector with a readout pin
Power 100 W max, 90 − 250 VAC, 48 − 445 Hz


Pictures