2465A: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
#redirect[[2465]]
{{Oscilloscope Sidebar |
title=Tektronix 2465A |
summary=Portable 150/250/350 4-ch scope |
image=Tek2465A.jpg |
caption=Tektronix 2465A |
introduced=1986 |
discontinued=(?) |
manuals=
* [[Media:050-2180-06.pdf|24x5A/2467 Firmware Release Notes]]
* [[Media:070-5857-00.pdf|24x5A Options Service]] (OCR PDF, 26M)
* [[Media:070-6014-00.pdf|24x5A Operator]]
* [[Media:070-6017-00.pdf|2455A/2445A Service]] (OCR PDF, 20M)
* [[Media:070-6019-01.pdf|2465A/2467 Service]] (OCR PDF, 29M)
}}
 
The '''Tektronix 2465A''' is a four-channel 350 MHz portable oscilloscope. 
The 2445A and 2455A are 150 and 250 MHz versions.
 
CRT is the [[154-0850-01]].
 
The ''2467''' is the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467A uses a [[Micro-channel plate CRT]]. The MCP CRT enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.
 
The 2465A is from the penultimate generation of analog Tektronix scopes.
 
The horizontal amplifier in the 2465 was designed by [[Art Metz]] and [[Ken Schlotzhauer]].
Art Metz also worked on the triggers.
Art Metz and [[Walt Ainsworth]] designed the sweeps.
 
'''Options'''
* Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
* Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
* Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
* Option 09 added option 06, the CTT, plus a 17-bit [[P6407|P6407 word recognizer probe]].
* Option 10 added a [[GPIB interface]] for remote control.
* Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument.  Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)
 
{{BeginSpecs}}
{{SpecGroup|2445}}
{{Spec | Bandwidth | 150 MHz }}
{{SpecGroup|2455A}}
{{Spec | Bandwidth | 250 MHz }}
{{SpecGroup|2465A}}
{{Spec | Bandwidth | 350 MHz }}
{{SpecGroup|2467}}
{{Spec | Bandwidth | 350 MHz }}
{{SpecGroup|Common}}
{{Spec | Sweep Rate | 500 ps/div }}
{{Spec | Channels | Four independent channels }}
{{Spec | Vertical | 2 mV/div vertical sensitivity }}
{{Spec | Cursors | Delta Volts and Delta Time Cursors }}
{{Spec | CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Trigger Bandwidth | 500 MHz min. }}
{{Spec | Input Impedance| 50 Ω/1 MΩ inputs with 50 Ω protection }}
{{Spec | Probes | Two or four [[P6136]] ×10 probes, 1.3 m  }}
{{EndSpecs}}
 
==See also==
* [[2465]]
* [[2465B]]
* [[2445 PSU Repairs|PSU Repairs]]
 
==Links==
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/2445A.htm Tek 2445A page @amplifier.cd]
* [http://www.cromwell-intl.com/radio/tek2445a.html Bob Cromwell's page on repairing a 2445A]
* [http://www.tek.com/support/faqs/how-do-you-run-self-tests-2465 How to enter test mode]
 
==Pictures==
===2465A===
<gallery>
Tek2465A.jpg
Tek 2465a 1.jpg
Tek 2465a 2.jpg
Tek 2465a 3.jpg
Tek 2465a 4.jpg
Tek 2465a 5.jpg
</gallery>
 
==Pictures==
===2465A===
<gallery>
Tek 2467 bright.jpg
Tek 2467 rear.jpg
</gallery>
 


[[Category:246x series scopes]]
[[Category:246x series scopes]]
[[Category:Introduced in 1986]]
[[Category:Introduced in 1986]]

Revision as of 18:41, 26 April 2019

{{{manufacturer}}} 
Portable 150/250/350 4-ch scope
Tektronix 2465A

Produced from 1986 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures


The Tektronix 2465A is a four-channel 350 MHz portable oscilloscope. The 2445A and 2455A are 150 and 250 MHz versions.

CRT is the 154-0850-01.

The 2467' is the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467A uses a Micro-channel plate CRT. The MCP CRT enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.

The 2465A is from the penultimate generation of analog Tektronix scopes.

The horizontal amplifier in the 2465 was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. Art Metz and Walt Ainsworth designed the sweeps.

Options

  • Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
  • Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
  • Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
  • Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
  • Option 10 added a GPIB interface for remote control.
  • Option 11 added two probe-power connectors on the rear panel of the instrument. Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)

Key Specifications

     — 2445
Bandwidth 150 MHz
     — 2455A
Bandwidth 250 MHz
     — 2465A
Bandwidth 350 MHz
     — 2467
Bandwidth 350 MHz
     — Common
Sweep Rate 500 ps/div
Channels Four independent channels
Vertical 2 mV/div vertical sensitivity
Cursors Delta Volts and Delta Time Cursors
CRT Readout Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger Advanced Triggering with "Hands Off" Auto Level Triggering
Trigger Bandwidth 500 MHz min.
Input Impedance 50 Ω/1 MΩ inputs with 50 Ω protection
Probes Two or four P6136 ×10 probes, 1.3 m

See also

Links

Pictures

2465A

Pictures

2465A