2465A: Difference between revisions

3,502 bytes added ,  26 April 2019
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
#redirect[[2465]]
{{Oscilloscope Sidebar |
title=Tektronix 2465A |
summary=Portable 150/250/350 4-ch scope |
image=Tek2465A.jpg |
caption=Tektronix 2465A |
introduced=1986 |
discontinued=(?) |
manuals=
* [[Media:050-2180-06.pdf|24x5A/2467 Firmware Release Notes]]
* [[Media:070-5857-00.pdf|24x5A Options Service]] (OCR PDF, 26M)
* [[Media:070-6014-00.pdf|24x5A Operator]]
* [[Media:070-6017-00.pdf|2455A/2445A Service]] (OCR PDF, 20M)
* [[Media:070-6019-01.pdf|2465A/2467 Service]] (OCR PDF, 29M)
}}
 
The '''Tektronix 2465A''' is a four-channel 350 MHz portable oscilloscope. 
The 2445A and 2455A are 150 and 250 MHz versions.
 
CRT is the [[154-0850-01]].
 
The ''2467''' is the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467A uses a [[Micro-channel plate CRT]]. The MCP CRT enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.
 
The 2465A is from the penultimate generation of analog Tektronix scopes.
 
The horizontal amplifier in the 2465 was designed by [[Art Metz]] and [[Ken Schlotzhauer]].
Art Metz also worked on the triggers.
Art Metz and [[Walt Ainsworth]] designed the sweeps.
 
'''Options'''
* Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
* Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
* Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
* Option 09 added option 06, the CTT, plus a 17-bit [[P6407|P6407 word recognizer probe]].
* Option 10 added a [[GPIB interface]] for remote control.
* Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument.  Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)
 
{{BeginSpecs}}
{{SpecGroup|2445}}
{{Spec | Bandwidth | 150 MHz }}
{{SpecGroup|2455A}}
{{Spec | Bandwidth | 250 MHz }}
{{SpecGroup|2465A}}
{{Spec | Bandwidth | 350 MHz }}
{{SpecGroup|2467}}
{{Spec | Bandwidth | 350 MHz }}
{{SpecGroup|Common}}
{{Spec | Sweep Rate | 500 ps/div }}
{{Spec | Channels | Four independent channels }}
{{Spec | Vertical | 2 mV/div vertical sensitivity }}
{{Spec | Cursors | Delta Volts and Delta Time Cursors }}
{{Spec | CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Trigger Bandwidth | 500 MHz min. }}
{{Spec | Input Impedance| 50 Ω/1 MΩ inputs with 50 Ω protection }}
{{Spec | Probes | Two or four [[P6136]] ×10 probes, 1.3 m  }}
{{EndSpecs}}
 
==See also==
* [[2465]]
* [[2465B]]
* [[2445 PSU Repairs|PSU Repairs]]
 
==Links==
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/2445A.htm Tek 2445A page @amplifier.cd]
* [http://www.cromwell-intl.com/radio/tek2445a.html Bob Cromwell's page on repairing a 2445A]
* [http://www.tek.com/support/faqs/how-do-you-run-self-tests-2465 How to enter test mode]
 
==Pictures==
===2465A===
<gallery>
Tek2465A.jpg
Tek 2465a 1.jpg
Tek 2465a 2.jpg
Tek 2465a 3.jpg
Tek 2465a 4.jpg
Tek 2465a 5.jpg
</gallery>
 
==Pictures==
===2465A===
<gallery>
Tek 2467 bright.jpg
Tek 2467 rear.jpg
</gallery>
 


[[Category:246x series scopes]]
[[Category:246x series scopes]]
[[Category:Introduced in 1986]]
[[Category:Introduced in 1986]]
3,564

edits