2465A: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Redirected page to 2465)
 
No edit summary
(16 intermediate revisions by 4 users not shown)
Line 1: Line 1:
#redirect[[2465]]
{{Oscilloscope Sidebar
|manufacturer=Tektronix
|series=2400-series scopes
|model=2465A
|summary=Portable 150/250/350 MHz 4-ch scope
|image=Tek2465A.jpg
|caption=Tektronix 2465A
|introduced=1986
|discontinued=(?)
|designers=Art Metz; Ken Schlotzhauer; Walt Ainsworth
|manuals=
* [[Media:070-6014-00.pdf|24x5A Operator]]
* [[Media:070-6017-00.pdf|2455A/2445A Service]] (OCR, 20M)
* [[Media:070-5857-00.pdf|24x5A Options Service]] (OCR, 26M)
* [[Media:070-6019-01.pdf|2465A/2467 Service]] (OCR, 29M)
* [[Media:070-6291-00.pdf|Tektronix 2445/2465/2467 Buffer Test Kit]] (needs OCR)
'''Modifications'''
* [[Media:050-2180-06.pdf|24x5A/2467 Firmware Release Notes]]
* [[Media:050-2180-06.pdf|2445A/2455A/2465A/2467 U2160/U2260 replacement]]
{{ROM Images}}
* A5U2160:  [[Media:160-3302-09.bin|160-3302-09]] / [[Media:160-3302-07.bin|-07]] / [[Media:160-3302-06.bin|-06]] / [[Media:160-3302-04.bin|-04]]
* A5U2260:  [[Media:160-3303-09.bin|160-3303-09]] / [[Media:160-3303-07.bin|-07]] / [[Media:160-3303-06.bin|-06]] / [[Media:160-3303-04.bin|-04]]
* A20U4260: [[Media:160-3676-02.bin|160-3676-02]]
* A27U5930: [[Media:160-3678-04.bin|160-3678-04]]
}}
The '''Tektronix 2465A''' is a four-channel 350 MHz portable oscilloscope.  The '''2445A''' and '''2455A''' are 150 and 250 MHz versions. CRT is the [[154-0850-01]].
 
The '''[[2467]]''' and '''[[2467B]]''' are the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467 and 2467B use a [[micro-channel plate CRT]] that enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.
 
The 2465A is from the penultimate generation of analog Tektronix scopes.
 
The horizontal amplifier in the 2465A was designed by [[Art Metz]] and [[Ken Schlotzhauer]]. Art Metz also worked on the triggers. Art Metz and [[Walt Ainsworth]] designed the sweeps.
 
'''Options'''
* Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
* Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
* Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
* Option 09 added option 06, the CTT, plus a 17-bit [[P6407|P6407 word recognizer probe]].
* Option 10 added a [[GPIB interface]] for remote control.
* Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument.  Only shown in the 1987 catalogue.
 
{{BeginSpecs}}
{{Spec | Bandwidth      | 2455: 150 MHz; 2455A: 250 MHz; 2465A: 350 MHz }}
{{Spec | Sweep Rate      | 500 ps/div }}
{{Spec | Channels        | Four independent channels }}
{{Spec | Vertical        | 2 mV/div vertical sensitivity }}
{{Spec | Cursors        | Delta Volts and Delta Time Cursors }}
{{Spec | CRT Readout    | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | Trigger        | 500 MHz min.; Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Input Impedance | 50 Ω/1 MΩ inputs with 50 Ω protection }}
{{Spec | Probes          | Two or four [[P6136]] ×10 probes, 1.3 m  }}
{{EndSpecs}}
 
==See also==
* [[2465]]
* [[2465B]]
* [[2445 PSU Repairs|PSU Repairs]]
 
==Links==
* [https://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/2445A.htm Tek 2445A page @amplifier.cd]
* [https://www.cromwell-intl.com/radio/tek2445a.html Bob Cromwell's page on repairing a 2445A]
* [https://www.tek.com/support/faqs/how-do-you-run-self-tests-2465 How to enter test mode]
 
==Pictures==
<gallery>
Tek2465A.jpg
Tek 2465a 1.jpg
Tek 2465a 2.jpg
Tek 2465a 3.jpg
Tek 2465a 4.jpg
Tek 2465a 5.jpg
</gallery>
 
{{CRTs|2445A}}
{{CRTs|2455A}}
{{CRTs|2465A}}
 
{{Custom ICs|2445A}}
{{Custom ICs|2455A}}
{{Custom ICs|2465A}}
 
 
[[Category:246x series scopes]]
[[Category:Introduced in 1986]]

Revision as of 04:05, 4 April 2022

Tektronix 2465A
Portable 150/250/350 MHz 4-ch scope
Tektronix 2465A

Produced from 1986 to (?)

Manuals
ROM Images
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 2465A is a four-channel 350 MHz portable oscilloscope. The 2445A and 2455A are 150 and 250 MHz versions. CRT is the 154-0850-01.

The 2467 and 2467B are the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467 and 2467B use a micro-channel plate CRT that enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.

The 2465A is from the penultimate generation of analog Tektronix scopes.

The horizontal amplifier in the 2465A was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. Art Metz and Walt Ainsworth designed the sweeps.

Options

  • Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
  • Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
  • Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
  • Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
  • Option 10 added a GPIB interface for remote control.
  • Option 11 added two probe-power connectors on the rear panel of the instrument. Only shown in the 1987 catalogue.

Key Specifications

Bandwidth 2455: 150 MHz; 2455A: 250 MHz; 2465A: 350 MHz
Sweep Rate 500 ps/div
Channels Four independent channels
Vertical 2 mV/div vertical sensitivity
Cursors Delta Volts and Delta Time Cursors
CRT Readout Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger 500 MHz min.; Advanced Triggering with "Hands Off" Auto Level Triggering
Input Impedance 50 Ω/1 MΩ inputs with 50 Ω protection
Probes Two or four P6136 ×10 probes, 1.3 m

See also

Links

Pictures


CRTs used in the 2445A

No results


CRTs used in the 2455A

No results


CRTs used in the 2465A

Page Part nos Description Designers Used in
154-0850-01 154-0850-00 154-0850-01 CRT 2424L 2430 2430A 2431L 2432 2439 2440 2445 2465 2465A 2465B


Custom ICs used in the 2445A

No results

Custom ICs used in the 2455A

No results

Custom ICs used in the 2465A

No results