2465B: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
#redirect[[2465]]
{{Oscilloscope Sidebar |
title=Tektronix 2465B |
summary=Portable 200/250/400 4-ch scope |
image=Tek 2455b trace.jpg |
caption=Tektronix 2465B |
introduced=1989 |
discontinued=(?) |
manuals=
* [[Media:070-6860-00.pdf|2445B/2455B/2465B Operator]]
* [[Media:070-6861-00.pdf|2467B Operator -00]]
* [[Media:070-6861-01.pdf|2467B Operator -01]]
* [[Media:070-6861-02.pdf|2467B Operator -02]]
* [[Media:070-6862-00.pdf|2445B/2455B Service]]
* [[Media:070-6863-00.pdf|2465B/2467B Service -00]]
* [[Media:070-6863-01.pdf|2465B/2467B Service -01]]
* [[Media:070-6864-02.pdf|2465B/2467B Options Service]]
* [[Media:070-6882-00.pdf|2445B/2455B Service]]
* [[Media:070-7148-00.pdf|2445B/2465B/2467B Quick Start]]
}}
 
The '''Tektronix 2465B''' is a four-channel 400 MHz portable oscilloscope. 
The 2445B and 2455B are 2050 and 250 MHz versions.
 
CRT is the [[154-0850-01]].
 
The ''2467B''' is the same as the 2465B, except that the 2465B uses a conventional CRT while the 2467B uses a [[Micro-channel plate CRT]]. 
 
The 2465B is from the penultimate generation of analog Tektronix scopes.
 
The horizontal amplifier in the 2465B was designed by [[Art Metz]] and [[Ken Schlotzhauer]].
Art Metz also worked on the triggers.
Art Metz and [[Walt Ainsworth]] designed the sweeps.
 
'''Options'''
* Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
* Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
* Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
* Option 09 added option 06, the CTT, plus a 17-bit [[P6407|P6407 word recognizer probe]].
* Option 10 added a [[GPIB interface]] for remote control.
* Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument.  Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)
* Option 46 is the designation for the military version of the scope (OS-288/G) that included option 10 IEEE-488 interface and 2 probes.
 
{{BeginSpecs}}
{{SpecGroup|2445B}}
{{Spec | Bandwidth | 200 MHz }}
{{SpecGroup|2455B}}
{{Spec | Bandwidth | 250 MHz }}
{{SpecGroup|2465B}}
{{Spec | Bandwidth | 400 MHz }}
{{SpecGroup|2466B}}
{{Spec | Bandwidth | 400 MHz }}
{{SpecGroup|2467B}}
{{Spec | Bandwidth | 400 MHz }}
{{SpecGroup|Common}}
{{Spec | Sweep Rate | 500 ps/div }}
{{Spec | Channels | Four independent channels }}
{{Spec | Vertical | 2 mV/div vertical sensitivity }}
{{Spec | Cursors | Delta Volts and Delta Time Cursors }}
{{Spec | CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators }}
{{Spec | Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering }}
{{Spec | Trigger Bandwidth | 500 MHz min. }}
{{Spec | Input Impedance| 50 Ω/1 MΩ inputs with 50 Ω protection }}
{{Spec | Probes | Two or four [[P6131]] ×10 probes, 1.3 m  }}
{{EndSpecs}}
 
==Prices==
1990: $13,045 (2467B) = $24,400 equivalent in 2017
 
==See also==
* [[2465]]
* [[2465A]]
* [[2445 PSU Repairs|PSU Repairs]]
 
==Links==
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/2465B.htm Tek 2465B page @ amplifier.cd]
* [http://www.eevblog.com/forum/testgear/tektronix-2465b-oscilloscope-teardown/ Tektronix 2465B oscilloscope teardown] @ EEVblog forum (lots of nice internal pictures)
* [https://www.youtube.com/watch?v=ZGi1Uw8l-ac 2465B vs. 2467B @ YouTube]
* [http://www.tek.com/support/faqs/how-do-you-run-self-tests-2465 How to enter test mode]
* [http://worldphaco.com/uploads/TEKTRONIX_2465b_OSCILLOSCOPE_CALIBRATION___REPOWERING_THE_DS1225.pdf 2465B NVRAM replacement]
* [http://worldphaco.com/uploads/TEKTRONIX_2465b_OSCILLOSCOPE_A5_BOARD_REPAIR.pdf 2465B SMD capacitor leak repair]
 
==Pictures==
===2455B===
<gallery>
Tek 2455b trace.jpg
</gallery>
 
===2465B===
<gallery>
Tek 2465b trace1.jpg |2465B (photo by Alex Schonfeld)
Tek 2465b trace2.jpg |2465B (photo by Alex Schonfeld)
Tek 2465b trace3.jpg |2465B (photo by Alex Schonfeld)
Tek 2465b trace4.jpg |2465B (photo by Alex Schonfeld)
Tek 2465b trace5.jpg |2465B (photo by Alex Schonfeld)
</gallery>
 
===2465BDV===
<gallery>
Tek 2465bdv 1.jpg
Tek 2465bdv 3.jpg
Tek 2465bdv 2.jpg
Tek 2465bdv 4.jpg
</gallery>
 
===2467B===
<gallery>
Tek_2467B.jpg
</gallery>




[[Category:246x series scopes]]
[[Category:246x series scopes]]
[[Category:Introduced in 1989]]
[[Category:Introduced in 1989]]

Revision as of 18:41, 26 April 2019

{{{manufacturer}}} 
Portable 200/250/400 4-ch scope
Tektronix 2465B

Produced from 1989 to (?)

Manuals
Manuals – Specifications – Links – Pictures


The Tektronix 2465B is a four-channel 400 MHz portable oscilloscope. The 2445B and 2455B are 2050 and 250 MHz versions.

CRT is the 154-0850-01.

The 2467B' is the same as the 2465B, except that the 2465B uses a conventional CRT while the 2467B uses a Micro-channel plate CRT.

The 2465B is from the penultimate generation of analog Tektronix scopes.

The horizontal amplifier in the 2465B was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. Art Metz and Walt Ainsworth designed the sweeps.

Options

  • Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
  • Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
  • Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
  • Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
  • Option 10 added a GPIB interface for remote control.
  • Option 11 added two probe-power connectors on the rear panel of the instrument. Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)
  • Option 46 is the designation for the military version of the scope (OS-288/G) that included option 10 IEEE-488 interface and 2 probes.

Key Specifications

     — 2445B —
Bandwidth 200 MHz
     — 2455B —
Bandwidth 250 MHz
     — 2465B —
Bandwidth 400 MHz
     — 2466B —
Bandwidth 400 MHz
     — 2467B —
Bandwidth 400 MHz
     — Common —
Sweep Rate 500 ps/div
Channels Four independent channels
Vertical 2 mV/div vertical sensitivity
Cursors Delta Volts and Delta Time Cursors
CRT Readout Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger Advanced Triggering with "Hands Off" Auto Level Triggering
Trigger Bandwidth 500 MHz min.
Input Impedance 50 Ω/1 MΩ inputs with 50 Ω protection
Probes Two or four P6131 ×10 probes, 1.3 m

Prices

1990: $13,045 (2467B) = $24,400 equivalent in 2017

See also

Links

Pictures

2455B

2465B

  • 2465B (photo by Alex Schonfeld)

    2465B (photo by Alex Schonfeld)

  • 2465B (photo by Alex Schonfeld)

    2465B (photo by Alex Schonfeld)

  • 2465B (photo by Alex Schonfeld)

    2465B (photo by Alex Schonfeld)

  • 2465B (photo by Alex Schonfeld)

    2465B (photo by Alex Schonfeld)

  • 2465B (photo by Alex Schonfeld)

    2465B (photo by Alex Schonfeld)

2465BDV

2467B

Retrieved from "https://w140.com/tekwiki/index.php?title=2465B&oldid=44784"