2707

From TekWiki
Revision as of 23:45, 23 October 2021 by Wb6ghk (talk | contribs)
Jump to navigation Jump to search
Tektronix 2707
Tracking Generator for 2711, 2712, 2714, 2715 Spectrum Analyzers
Tektronix 2707

Produced from 1994 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 2707 is an external Tracking Generator for use with the 2711, 2712, 2714, and 2715 Spectrum Analyzers.

The Tektronix 2707 Tracking Generator is used to characterize filters, test duplexers and cables, measure frequency response, SWR measurements (with a return-loss bridge), and EMI site attenuation tests. The 2707 performs swept measurements from 100 Hz to 1.8 GHz with output from -48 dBm to 0 dBm (-1.2 dBmV to 46.8 dBmV) in 0.1 dB Steps and at least 100 dB dynamic range to see filter, ultimate rejection, or circuit isolation characteristics.

The 2707 Tracking Generator connects to 271X spectrum analyzers equipped with factory Opt. 15 using a single LO coax cable and one 15-pin control cable. Option 15 provides a rear panel SMA-F and one three row 15-pin Sub-D (DB15) interconnection control cable.

2711’s and 2714’s ordered without Option 07 or Option 15 have a female DB9 nine pin rear panel connector and will not work with the external 2707 Tracking Generator. All 2715’s have a female DB15 three row fifteen pin connector without the SMA-F connector unless Opt. 15.

The 2707 External Tracking Generators with Opt. 01 have a 75 Ω output for use with 2714 and 2715 75 Ω analyzers.

Key Specifications

Output frequency 100 kHz to 1.8 GHz
Output level -48 dBm to 0 dBm
Output offset -5 to +60 kHz

Photos