Page values for "2754"

Jump to navigation Jump to search

"Specifications" values

20 rows are stored for this page
Parameter   Frequency
Value   

10 kHz to 21 GHz

Parameter   Frequency Span (plus 0 Hz and MAX)
Value   

200 Hz/div to 1 GHz/div in 1-2-5 sequence

Parameter   Resolution Bandwidth
Value   

6 dB bandwidths from 1 kHz to 3 MHz in decade steps

Parameter   RF Input impedance
Value   

50 Ω

Parameter   Maximum Safe Input Power
Value   
  • CW Power: 1 Watt (+30 dBm);
  • Pulse Power: 75 W peak (1 µS pulse width, 0.1% duty factor)
Parameter   RF Attenuator
Value   

0 dB to 60 dB, 10 dB steps

Parameter   Reference Level
Value   

-117 dBm to +40 dBm (+30 dBm maximum safe input)

Parameter   LO Output Power (2 to 6 GHz)
Value   

1st LO: +7.5 dBm to +15 dBm; 2nd LO: -22 dBm to +15 dBm; Must be terminated into 50 Ω when they are not connector to an external device

Parameter   Sweep Speed
Value   

5 s to 2 µs in 1, 2, 5 sequence (10 s/div in auto)

Parameter   Video Bandwidth
Value   

3 Hz to 30 kHz

Parameter   Triggering Modes
Value   

Internal, External, Line, Free Run

Parameter   Displayed Average Noise
Value   

−115 dBm

Parameter   Display Dynamic Range
Value   

80 dB

Parameter   Dynamic Range (Compression to noise)
Value   

134 dBm

Parameter   Calibrator (Cal out)
Value   

50Ω, -20 dBm ±0.3 dB at 100 MHz

Parameter   Included Accessories
Value   

Operator’s Manual; Programmer’s Manual; 6-ft, 50Ω coaxial cable, N-N; 18-inch, 50Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord, power cord clamp, and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter

Parameter   Weight
Value   

27 kg (60 lbs)

Parameter   Power
Value   

90 − 132 VAC, 48 to 448 Hz; 180 – 250 VAC, 48 to 72 Hz. At 115 VAC, 60 Hz, 210 W max with all options

Parameter   Operating Atmospherics
Value   

Temperatures: 0 °C to +50 °C; Humidity: 95% below +30 °C, 75% above +30 °C, 45% above +40 °C; Altitude: Up to 3 km (10,000 ft)

Parameter   GPIB Characteristics
Value   

P Version: In accordance with IEEE Standard 488-1978 implemented as SH1, AH1, T5, L3, SR1, RL1, PP1, DC1, DT1, and C0; Non-P Version (Plotter Output): Implemented as SH1, AH0, T3, L0, SR0, RL0, PP0, DC0, DT0, and C0

"Products" values

1 row is stored for this page
Manufacturer   Tektronix
Model   2754P
Class   Spectrum Analyzer
Description   

21 GHz Spectrum Analyzer

Introduced   1987
Discontinued   1993