292: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(New page: * [http://bama.edebris.com/download/tek/292/Tek%20292.pdf Tektronix 292 Manual (PDF)])
 
No edit summary
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
* [http://bama.edebris.com/download/tek/292/Tek%20292.pdf Tektronix 292 Manual (PDF)]
The '''Tektronix Type 292''' is a Semiconductor Tester Power Supply, to be used with a test fixture.
 
The [[016-0057-00]] is the standard fixture for use with the 292.
 
A [[016-0058-00]] board, intended for grounded base circuit, is listed
but not pictured in the 292 manual, and is never mentioned in any TEK catalog.
 
A [[016-0059-00]] PCB for testing diodes is shown in the 292 manual.
This diode test jig adapter was using a 013-0080-00 diode test jig.
This test jig replaced the poorly working (bad contact) original TF-1
(017-0721) for the 291, together with a new adapter ([[017-0075-00]]).
 
==Manuals==
 
* [http://w140.com/tek_292.pdf Tektronix 292 Manual (PDF)]
* [http://bama.edebris.com/download/tek/292/Tek%20292.pdf Tektronix 292 Manual (BAMA, PDF)]
* [[Media:Tek 292 fcp april 1967.pdf|Tektronix 292 Factory Calibration Procedure, April 1967]]
 
==Pictures==
 
<gallery>
Tek 292 1.jpg
Tek 292 2.jpg
Tek 292.jpg
Tek 292 no fixture.jpg
Tek 292 schem.png | schematic
</gallery>
 
 
[[Category:Introduced in 1964]]
[[Category:Accessory power supplies]]

Revision as of 10:59, 8 June 2019

The Tektronix Type 292 is a Semiconductor Tester Power Supply, to be used with a test fixture.

The 016-0057-00 is the standard fixture for use with the 292.

A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.

A 016-0059-00 PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. This test jig replaced the poorly working (bad contact) original TF-1 (017-0721) for the 291, together with a new adapter (017-0075-00).

Manuals

Pictures