2A61
The Tektronix 2A61 is a differential amplifier plug-in for 560-series scopes. The deflection factor ranges from 10uV/div to 20mV/div. There are switch-selectable high-frequency and low-frequency cutoffs. At 20mV/div, the minimum low-frequency cutoff is 0.06Hz and the maximum high-frequency cutoff is 0.3MHz.
The front end consists of a differential amplifier. Up to serial number 986, the front-end differential amplifier used a pair of 5842 tubes biased with a tail current of 10mA and a plate-to-cathode voltage of about 100V. Starting with serial number 987, the front-end differential amplifier was made with four 7586 nuvistor triodes. They are in parallel pairs. The tail current in the 987-and-up version is about 16mA and the nuvistors have a plate-to-cathode voltage of about 70V.
The second gain stage is a differential amplifier made of a pair of a pair of germanium PNP transistors. To implement the low-frequency cutoff, the 2A61 has a large electrolytic capactitor, C437, (13,000uF or 20,000uF depending on serial number) in the emitter frequency compensation network of the second differential amplifier stage. Although C437 is an polarized, it is operated with no DC bias and therefore sees reverse voltage as part of normal operation. D437 and D438 shunt C437, preventing it from ever seeing a voltage more than one diode drop. Most electrolytic capacitors are specified to handle reverse voltages of at least 1V without damage.
The 2A61 manual's calibration instructions recommend using the Heathkit IG-72
Audio Generator.
-
Front
-
Left
-
Right
-
Top
-
Bottom
-
-
-
-
