308

From TekWiki
Revision as of 16:41, 10 November 2020 by Peter (talk | contribs)
Jump to navigation Jump to search
{{{manufacturer}}} 
20 MHz 8-ch Logic Analyzer
Sony/Tektronix 308

Produced from 1980 to 1986

Manuals

ROM images

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Sony/Tektronix 308 is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes.

The 308 uses two probes, the standard P6451 8-channel + clock data acquisition probe, and the optional 16-channel P6406 word recognizer probe. Both use 012-0747-00 cable harnesses to attach to the data source.

Key Specifications

     — Inputs
Data Eight data channels + 1 clock channel (P6451 probe), impedance 1 MΩ // 5 pF, max. ±40 V nondestructive, logic threshold fixed 1.4 V (TTL) or variable from −12 V to +12 V
Word recognizer Sixteen TTL inputs (+40/−400 μA max.), max. +15/−1 V
Serial BNC connector, 1 MΩ // 40 pF, max. ±250 V on BNC; used with P6107 probe, 10 MΩ // 13 pF, max. ±500 V
Qualifier BNC connector, 10 kΩ, max. +10/−5 V
     — Acquisition
Clock 50 ns to 200 ms per sample (1-2-5 sequence) or external down to 50 ns
Timing Data setup time min. 25 ns, hold time min. 0 ns
Memory 2 × 252 eight-bit words (acquisition + reference)
Trigger mode PRE (trigger at memory location 240) or POST (location 13)
Trigger delay 0-65535 clock periods
Serial data 5, 6, 7 or 8 bits per character, asynchronous (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1900, 2400, 4800 or 9600 bits/s or external up to 9600 bits/s) or synchronous up to 9600 bits/s
     — Display
CRT 6.8 cm × 5.4 cm, P4 phosphor (white)
     — General
Power 90-132 V or 180-250 V, 48-440 Hz
Weight 3.7 kg (8.16 lb)

Links

Internals

The 308 is built around an Intel 8085A microprocessor. The display is a magnetically deflected raster-scan CRT. The only Tek-specific IC in the 308 is a 155-0067-02 SMPS controller.

Pictures

Internals

Probes