3A10: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(local manual copy) |
||
(12 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
{{Plugin Sidebar | {{Plugin Sidebar | ||
|manufacturer=Tektronix | |||
summary=Transducer Amplifier | | |series=560-series scopes | ||
image=Tek 3a10.jpg | | |type=3A10 | ||
caption=Tektronix 3A10 front | | |summary=Transducer Amplifier | ||
|image=Tek 3a10 front.jpg | |||
introduced=1971 | | |caption=Tektronix 3A10 front | ||
discontinued=1975 | | |designers= | ||
manuals= | |introduced=1971 | ||
* [ | |discontinued=1975 | ||
|manuals= | |||
* [[Media:070-1062-00.pdf|Tektronix 3A10 Manual]] (PDF) | |||
}} | }} | ||
The '''Tektronix 3A10''' is | The '''Tektronix 3A10''' is a differential amplifier plug-in for [[560-series scopes]]. | ||
It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer. It also has a 6-pin input connector ([[Bendix connector|Bendix MS3101A-10-6S]]) to directly connect to the [[015-0169-00|015-0169-00 Strain Gage Adapter]]. | |||
The 3A10 circuit is partially based on the [[1A7A]]'s. | |||
{{BeginSpecs}} | |||
{{Spec | Deflection | 10 μV/Div to 10 V/Div in 1–2–5 sequence }} | |||
{{Spec | Input impedance | 1 MΩ // 47 pF (Volts mode) or 10 MΩ (transducer mode) }} | |||
{{Spec | Bandwidth | 1 MHz, LF limit switchable DC, 0.1 Hz to 10 kHz in six steps, HF limit switchable 100 Hz to 1 MHz in ×3/×10 steps, AC coupling 1.6 Hz }} | |||
{{Spec | Signal ranges | }} | |||
{| class="wikitable" border=1 style="margin-left: 8em;" | | |||
!Range | |||
! Differential signal | |||
! DC Offset | |||
! Common mode | |||
|- | |||
| 10 μV/Div to 10 mV/Div || ±1 V || ±1 V || ±10 V | |||
|- | |||
| 20 mV/Div to 0.1 V/Div || ±10 V || ±10 V || ±100 V | |||
|- | |||
| 0.2 V/Div to 1 V/Div || ±100 V || ±100 V || ±500 V | |||
|- | |||
| 2 V/Div to 10 V/Div || ±1000 V || ±1000 V || ±500 V | |||
|- | |||
|} | |||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
Tek 3a10.jpg | |||
3a10 1.jpg | |||
3a10 2.jpg | |||
3a10 3.jpg | |||
Tek 3a10 top.jpg|top | |||
Tek 3a10 right.jpg|right | |||
Tek 3a10 left.jpg|left | |||
Tek 3a10 front2.jpg|front | |||
Tek 3a10 bottom.jpg|bottom | |||
Tek 3a10 front.jpg|front | |||
</gallery> | </gallery> | ||
[[Category:560 series plugins]] | [[Category:560 series plugins]] |
Revision as of 09:45, 4 October 2021
The Tektronix 3A10 is a differential amplifier plug-in for 560-series scopes.
It is intended for use with transducers and for that purpose it has a DC-coupled differential input and a variable voltage supply for powering the transducer. It also has a 6-pin input connector (Bendix MS3101A-10-6S) to directly connect to the 015-0169-00 Strain Gage Adapter.
The 3A10 circuit is partially based on the 1A7A's.
Key Specifications
Deflection | 10 μV/Div to 10 V/Div in 1–2–5 sequence |
---|---|
Input impedance | 1 MΩ // 47 pF (Volts mode) or 10 MΩ (transducer mode) |
Bandwidth | 1 MHz, LF limit switchable DC, 0.1 Hz to 10 kHz in six steps, HF limit switchable 100 Hz to 1 MHz in ×3/×10 steps, AC coupling 1.6 Hz |
Signal ranges |
Range | Differential signal | DC Offset | Common mode |
---|---|---|---|
10 μV/Div to 10 mV/Div | ±1 V | ±1 V | ±10 V |
20 mV/Div to 0.1 V/Div | ±10 V | ±10 V | ±100 V |
0.2 V/Div to 1 V/Div | ±100 V | ±100 V | ±500 V |
2 V/Div to 10 V/Div | ±1000 V | ±1000 V | ±500 V |
Pictures
-
-
-
-
-
top
-
right
-
left
-
front
-
bottom
-
front