500-series plug-ins (Letter-series and 1-series): Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
These plug-ins fit in [[500-series scopes]] and in external power supply units such as the [[127]], [[132]], and [[133]].
These plug-ins fit in [[500-series scopes]] and in external power supply units such as the [[127]], [[132]], and [[133]].
They use the [[500 Series plug-in interface|500-series plug-in interface]].
They use the [[500 Series plug-in interface|500-series plug-in interface]].
The transition from letter-series plug-ins to 1-series happened in fall of 1965.


===Tektronix made plug-ins===
===Tektronix made plug-ins===
Line 7: Line 8:
Tek b front2.jpg        | '''[[B|B – Same as A, with an extra 10× of gain]]''', 1954
Tek b front2.jpg        | '''[[B|B – Same as A, with an extra 10× of gain]]''', 1954
53-54c-crop.jpg          | '''[[C|C – 24 MHz (53C: 8.5 MHz) dual channel amplifier]]'''
53-54c-crop.jpg          | '''[[C|C – 24 MHz (53C: 8.5 MHz) dual channel amplifier]]'''
Type ca front.JPG        | '''[[CA|CA – 24 MHz dual channel amplifier]]'''
Tek Type CA front.jpg    | '''[[CA|CA – 24 MHz dual channel amplifier]]'''
Tek type d front.jpg    | '''[[D|D – 2 MHz differential amplifier]]''', 1954
Tek type d front.jpg    | '''[[D|D – 2 MHz differential amplifier]]''', 1954
Tek type e front.jpg    | '''[[E|E – 60 kHz high gain differential amplifier]]''', 1955
Tek type e front.jpg    | '''[[E|E – 60 kHz high gain differential amplifier]]''', 1955
Line 18: Line 19:
Type m front.jpg        | '''[[M|M – 20 MHz four channel amplifier]]''', 1962
Type m front.jpg        | '''[[M|M – 20 MHz four channel amplifier]]''', 1962
Type n front2.jpg        | '''[[N|N – 600 MHz sampler]]''', 1960
Type n front2.jpg        | '''[[N|N – 600 MHz sampler]]''', 1960
Type_O_front_lighter.jpg | '''[[O|O – 25 MHz op-amp]]''', 1962
Tek Type O front.jpg     | '''[[O|O – 25 MHz op-amp]]''', 1962
Type_P_front.jpg        | '''[[P|P – Calibration aid (pulser)]]''', 1959
Type_P_front.jpg        | '''[[P|P – Calibration aid (pulser)]]''', 1959
Type q front.jpg        | '''[[Q|Q – Transducer driver]]''', 1960
Type q front.jpg        | '''[[Q|Q – Transducer driver]]''', 1960
Line 26: Line 27:
V_tentativ.jpg          | '''[[V|V – video amplifier]]''' (prototype only)
V_tentativ.jpg          | '''[[V|V – video amplifier]]''' (prototype only)
Type w front.jpg        | '''[[W|W – 23 MHz, differential comparator]]''', 1965
Type w front.jpg        | '''[[W|W – 23 MHz, differential comparator]]''', 1965
Type Z front.jpg         | '''[[Z|Z – 13 MHz, differential comparator]]''', 1960
Tek Type Z front.jpg     | '''[[Z|Z – 13 MHz, differential comparator]]''', 1960
Tek 1A1 front.jpg        | '''[[1A1|1A1 – 50 MHz dual channel amplifier]]''', 1964
Tek 1A1 front.jpg        | '''[[1A1|1A1 – 50 MHz dual channel amplifier]]''', 1964
Tek 1a2 front.jpg        | '''[[1A2|1A2 – 50 MHz dual channel amplifier]]''', 1964
Tek 1a2 front.jpg        | '''[[1A2|1A2 – 50 MHz dual channel amplifier]]''', 1964
Line 32: Line 33:
1a5 front.jpg            | '''[[1A5|1A5 – 50 MHz differential amplifier]]''', 1967
1a5 front.jpg            | '''[[1A5|1A5 – 50 MHz differential amplifier]]''', 1967
Tek 1a6 new.jpg          | '''[[1A6|1A6 – 2 MHz differential amplifier]]''', 1967
Tek 1a6 new.jpg          | '''[[1A6|1A6 – 2 MHz differential amplifier]]''', 1967
Tek 1a7 front2.jpg      | '''[[1A7|1A7 – 1 MHz high gain differential amplifier]]''', 1966
Tek 1a7 front2.jpg      | '''[[1A7|1A7 – 500 kHz high gain differential amplifier]]''', 1966
Tek 1a7a 2.JPG          | '''[[1A7A|1A7A – 1 MHz high gain differential amplifier]]''', 1968
1s1_front_details.JPG    | '''[[1S1|1S1 – 1 GHz, sampler]]''', 1965
1s1_front_details.JPG    | '''[[1S1|1S1 – 1 GHz, sampler]]''', 1965
1s2 front.jpg            | '''[[1S2|1S2 – 3.9 GHz, sampler and TDR]]''', 1967
1s2 front.jpg            | '''[[1S2|1S2 – 3.9 GHz, sampler and TDR]]''', 1967

Revision as of 12:29, 6 June 2021

These plug-ins fit in 500-series scopes and in external power supply units such as the 127, 132, and 133. They use the 500-series plug-in interface. The transition from letter-series plug-ins to 1-series happened in fall of 1965.

Tektronix made plug-ins

Non-Tektronix plug-ins

... that also work in 500-series scopes include, but are probably not limited to:

Retrieved from "https://w140.com/tekwiki/index.php?title=500-series_plug-ins_(Letter-series_and_1-series)&oldid=60989"