5000 Series plug-in interface

From TekWiki
Revision as of 04:53, 22 August 2020 by Peter (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tektronix 5000 series oscilloscope mainframes have two vertical plug-in slots, and one horizontal plug-in slots.

The interconnect on either slot type is a 56-pin PCB edge connector.

Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top.

  A side B side
Pin Function Function
1 +200 V +38 V unreg
2 Utility GND +5 V
3 Line trigger
4 Trig out (H) / Right trig in (V) Left trig in (V)
5 +30 V −30 V
6 +15 V [54xx only!] −15 V [54xx only!]
7 +plugin signal −plugin signal
8
9 Z Axis A Sweep Intensify
10 A gate Z Axis B Sweep
11 Sample pulse [note 1] Load stop [note 1]
12 Single-sweep mode
13 +plugin signal −plugin signal
14 Clean GND Return Clean GND Return
15 A sweep ALT drive
16 Lockout B sweep Trace separation
17 Lockout A sweep Single sweep reset
18 Chop sense Display on
19 100 μs/div detect Display chop
20 Chop activate
21 −30 V
22 TS7 TS10
23 TS5 TS6
24 Ch. 2 Col Ch. 2 Row / Sweep rate
25 TS3 TS2
26 TS8 TS9
27 TS1 TS4
28 Ch. 1 Col Ch. 1 Row

Notes

Pin group function legend

Plugin power & ground
HF signals
Readout system signals (5400 series only)

Description of signals

tba