500 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 17: | Line 17: | ||
| 3 || bgcolor="Yellow" | −Signal || 100 mV/cm, bias +67.5 V ±2% | | 3 || bgcolor="Yellow" | −Signal || 100 mV/cm, bias +67.5 V ±2% | ||
|- | |- | ||
| 4 || bgcolor="Yellow" | Int Trig | | 4 || bgcolor="Yellow" | Int Trig GND || [[544]], [[546]], [[547]], [[555]] only | ||
|- | |- | ||
| 5 || bgcolor="Yellow" | Int Trig in || [[544]], [[546]], [[547]], [[555]] only | | 5 || bgcolor="Yellow" | Int Trig in || [[544]], [[546]], [[547]], [[555]] only | ||
Revision as of 06:19, 13 June 2018
The plug-in interface of the 500-series scopes is a single 16-pin Amphenol connector.
Pin-out
| Pin | Function | Comment |
|---|---|---|
| 1 | +Signal | 100 mV/cm, bias +67.5 V ±2% |
| 2 | Ground | |
| 3 | −Signal | 100 mV/cm, bias +67.5 V ±2% |
| 4 | Int Trig GND | 544, 546, 547, 555 only |
| 5 | Int Trig in | 544, 546, 547, 555 only |
| 6 | n/c | |
| 7 | Slave Pulse out | 547 only |
| 8 | Multi-trace sync | Cathode; grounded by CA, M etc. in Alt Trace mode |
| 9 | −150 V | min. 3.8 mA, max. 60 mA |
| 10 | +100 V | min. 4.5 mA, max. 50 mA |
| 11 | +225 V | min. 16 mA, max. 75 mA |
| 12 | +350 V | min. 0 mA, max. 20 mA |
| 13 | 6.3 VAC | plug-in AC heater supply, max. 2.8 A |
| 14 | 6.3 VAC | return for pin 13 |
| 15 | +75 V | min./max. 150 mA for DC series heaters and LV supply |
| 16 | Multi-trace sync | Anode |
Pin group function legend
DC power AC and heater power Deflection and Trigger Signals Control Signals
