500 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
(integrated info from duplicate page) |
No edit summary |
||
Line 21: | Line 21: | ||
| 5 || bgcolor="Yellow" | Int Trig + || [[544]], [[546]], [[547]], [[549]], [[556]], late [[555]] only | | 5 || bgcolor="Yellow" | Int Trig + || [[544]], [[546]], [[547]], [[549]], [[556]], late [[555]] only | ||
|- | |- | ||
| 6 || Sawtooth | | 6 || bgcolor="LightGreen" | Sawtooth || [[556]] only, others n/c || | ||
|- | |- | ||
| 7 || bgcolor="LightGreen" | Slave Pulse out || [[547]] only | | 7 || bgcolor="LightGreen" | Slave Pulse out || [[547]] only |
Revision as of 10:15, 25 June 2018
The plug-in interface of the 500-series scopes is a single 16-pin Amphenol connector.
Pin-out
Pin | Function | Comment | |
---|---|---|---|
1 | +Signal | 100 mV/cm, bias +67.5 V ±2% | |
2 | Ground | ||
3 | −Signal | 100 mV/cm, bias +67.5 V ±2% | |
4 | Int Trig GND | 544, 546, 547, 549, 556, late 555 only | |
5 | Int Trig + | 544, 546, 547, 549, 556, late 555 only | |
6 | Sawtooth | 556 only, others n/c | |
7 | Slave Pulse out | 547 only | |
8 | Multi-trace sync | Cathode; grounded by CA, M etc. in Alt Trace mode | |
9 | −150 V | min. 3.8 mA, max. 60 mA | |
10 | +100 V | min. 4.5 mA, max. 50 mA | |
11 | +225 V | min. 16 mA, max. 75 mA | |
12 | +350 V | min. 0 mA, max. 20 mA | |
13 | 6.3 VAC | plug-in AC heater supply, max. 2.8 A | |
14 | 6.3 VAC | return for pin 13 | |
15 | +75 V | min./max. 150 mA for DC series heaters and LV supply | |
16 | Multi-trace sync | Anode |
Pin group function legend
DC power AC and heater power Deflection and Trigger Signals Control Signals
-
pinout shown in 556 schematic
-
pinout listed in 040-0065-00 kit docs
-
pinout shown in 1A2 schematic
-
Male pins on plugin
-
Rear lugs on plugin