506

From TekWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Tektronix 506
20 MHz scope
506 with 9A1 and 3B1

Produced from 1964 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix Type 506 is an oscilloscope with bandwidth above 20 MHz that uses 560-series horizontal plug-ins but special high-speed vertical plug-ins, the 9A1, and 9A2.

Like the scopes in the 560 Series, the 506 mainframe contains neither vertical nor horizontal amplifiers; the plug-ins directly drive the CRT deflection plates.

Key Specifications

  • please add

The 506 uses the T5033-31-1 CRT, which has P31 phosphor. It uses no post-deflection acceleration, total accelerating voltage is 3.5 kV.

Internals

The CRT circuit uses two 5642 high-voltage rectifier tubes, one for the CRT cathode voltage and one for the intensification voltage, which is applied to a second grid in the CRT.

The calibrator signal is produced by shaping mains frequency into a square wave. It is not just a simple clipping circuit. To speed up the edges, positive feedback is used. A cross-connected triode and pentode form a schmitt trigger. The input of the shaping circuit is the cathode of the triode and the output is the cathode of the pentode, which drives a voltage divider whose tap is selected by the front panel calibrator rotary switch.

The power supply is fairly typical of Tektronix scopes of the period. An OG3 tube establishes a −82 V reference voltage in the −100 V power supply section. The −100 V supply is then used as the reference voltage for the other power supply sections. Output tubes are used for all of the regulated supply voltages except the −12.2 V supply, which uses a 2N1529 germanium PNP transistor.

Pictures

Components

Some Parts Used in the 506

Part Part Number(s) Class Description Used in
0G3 154-0291-00 Gas Discharge Tube (Voltage regulator) 85 V voltage reference 132 506 547 560 561 561A 561S 564 565 567 661 TU-4 Z
12BH7 154-0046-00 Vacuum Tube (Dual Triode) dual triode 506 517A 561A 561S 564 567
5642 154-0051-00 154-0079-00 Vacuum Tube (Diode) directly-heated high-voltage rectifier 310 310A 316 317 360 453 502 502A 503 504 506 513 515 516 524 529 RM529 533 533A 535 536 543 543A 543B 545 545A 545B 547 551 555 556 560 561 561A 561S 564 567 570 575 581 581A 585 585A 647 647A
6AS7 154-020 154-0020-00 Vacuum Tube (Pentode) dual power triode 160 506 511A 512 513 517 517A 524 561 561A 561S 564
6AU6 154-0022-00 157-0073-00 157-0059-00 154-0284-00 Vacuum Tube (Pentode) RF pentode 107 160 181 190 60 2A60 72 3A72 3C66 310 310A 316 317 360 502 502A 506 511 511A 512 513 516 517 517A 524 526 529 RM529 531 531A 535 536 545 545A 546 547 549 555 561 561A 561S 564 565 567 570 575 581 581A 585 585A 80 C CA Q
6BL8 154-0278-00 Vacuum Tube (Triode/Pentode) triode-pentode combo 67 2B67 3B1 3B1S 3B2 3B3 3B4 503 504 506 516 549 561 561A 561S 564 565 567 Telequipment D52 Telequipment D56 Telequipment S31 Telequipment S32 Telequipment S32A Telequipment S51 Telequipment S52
6CZ5 154-0167-00 Vacuum Tube (Pentode) power pentode 317 502 506 526 555 561 561A 561S 564 565 567
6DJ8 154-0187-00 154-0305-00 Vacuum Tube (Dual Triode) dual triode 132 161 310A 316 317 502 502A 503 504 506 515 516 519 526 529 RM529 533 535 536 543 544 545 545A 545B 546 547 549 555 556 561A 561S 564 565 567 581 581A 585 585A 661 1A4 1S1 60 2A60 63 2A63 67 2B67 3A1 3A1S 3A2 3A3 3A6 3A7 72 3A72 75 3A75 4S2 51 3B1 3B1S 3B2 3B3 3B4 3M1 3S76 3T77 3T77A 9A1 9A2 1121 80 81 82 86 B O W Z Telequipment D56 Telequipment S32A Telequipment D52 S-311 Telequipment TD51 Telequipment S52 Telequipment S51 Telequipment Type A TU-4
7233 154-307 154-0307-00 Vacuum Tube (Triode) low-mu triode 132 506 561 561A 561S 564 565
T5033 CRT 5" CRT 561S 506