514: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 49: Line 49:


<gallery>
<gallery>
File:Tek 514d front.jpg          | Front
Tek 514d front.jpg          | Front
Tek 514 with bk curve tracer.jpg|514AD with B&K Curve Tracer
Tek 514 with bk curve tracer.jpg|514AD with B&K Curve Tracer
File:Tek 514d dist amp.jpg      | Distributed vertical amp
Tek 514d dist amp.jpg      | Distributed vertical amp
File:Tek 514d delay trimmers.jpg | Delay line trimmer caps  
Tek 514d delay trimmers.jpg | Delay line trimmer caps  
File:Tek 514d bottom.jpg        | Bottom view
Tek 514d bottom.jpg        | Bottom view
File:Tek514-PowerSupply.jpg      | Power Supply
Tek514-PowerSupply.jpg      | Power Supply
File:Tek514-upperDeckRear.jpg    | Upper Deck, rear
Tek514-upperDeckRear.jpg    | Upper Deck, rear
File:Tek514-upperDeckFront.jpg  | Upper Deck, front
Tek514-upperDeckFront.jpg  | Upper Deck, front
File:Tek514-lowerDeckFront.jpg  | Lower Deck, front
Tek514-lowerDeckFront.jpg  | Lower Deck, front
File:Tek514-lowerDeckRear.jpg    | Lower Deck, rear
Tek514-lowerDeckRear.jpg    | Lower Deck, rear
File:Tek514-fanMotor.jpg        | Fan Motor
Tek514-fanMotor.jpg        | Fan Motor
File:Tek514-lineSocket.jpg      | Line Socket
Tek514-lineSocket.jpg      | Line Socket
File:Tek 514d-vert schem2.png    | Vertical amp schematic
Tek 514d-vert schem2.png    | Vertical amp schematic
File:Tek_514_Vertical_preamp_early.jpg | Vertical preamp, early
Tek_514_Vertical_preamp_early.jpg | Vertical preamp, early
File:Tek_514_HV_PS_early.jpg    | HV Power Supply, early
Tek_514_HV_PS_early.jpg    | HV Power Supply, early
Tek 514ad 5535 1.jpg|514AD
Tek 514ad 5535 2.jpg|514AD
Tek 514ad 5535 3.jpg|514AD
Tek 514ad 5535 4.jpg|514AD
Tek 514ad 5535 5.jpg|514AD
Tek 514ad 5535 6.jpg|514AD
Tek 514ad 5535 7.jpg|514AD
Tek 514ad 5535 8.jpg|514AD
Tek 514ad 5535 9.jpg|514AD
Tek 514ad 5535 10.jpg|514AD
</gallery>
</gallery>


[[Category:Monolithic tube scopes]]
[[Category:Monolithic tube scopes]]

Revision as of 01:26, 15 November 2017

{{{manufacturer}}} 
10 MHz Tube scope
Tektronix 514 front

Produced from 1949 to 1956

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 514 is a monolithic general-purpose oscilloscope introduced in 1949 or 1950.

It was designed by Tektronix engineers Bob Davis and Dick Rhiger.

Using a three-section distributed amplifier, it provides frequency response from DC to 10 MHz. Prior to the 514, customers had to choose between an instrument with 10 MHz bandwidth (the 511) or an instrument with DC response (the 512). The 514 provides DC response and 10 MHz bandwidth.

It weighs 60 pounds (27 kg) and consumes 360 W. The 514 uses a 5CPA CRT with a total accelerating voltage of 3000 V (-1.5 kV on the CRT cathode and +1.5 kV on the CRT anode) . The standard phosphor for a 514 was P1. The deflection sensitivity of the CRT is approximately 27 V/cm vertical and 32 V/cm horizontal.

The power supply is regulated based on a -140 V reference produced by a OD3 gas regulator tube. The +225 V supply uses three 5V4G rectifier tubes in parallel.

Throughout its production run, a 'D' variant was available (514D, with the 'D' being stamped in by hand on some models), which has a 24-section 250 ns lumped L-C delay line. There was also an 'A' version (514-A & 514-AD respectively), which appears to have been available in 1954. (There were also some models marked 'Series A', which may have been a predecessor to the 514A? How does the 514AD differ from the 514D?)

It has no thermal cutoff.

Key Specifications

Frequency response DC to 10 MHz
Input impedance 1 MΩ // 30 pF
Vertical deflection 100 V/cm down to 300 mV/cm (DC) / 30 mV/cm (AC), 1 - 3 - 10 sequence
Weight 62 pounds (28.1 kg)
Power consumption 375 W

Links

Pictures