515: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 23: Line 23:


The 515A has a Z-axis input and slightly higher vertical sensitivity than the 515.
The 515A has a Z-axis input and slightly higher vertical sensitivity than the 515.
The maximum vertical sensitivity is 100mV/div for the 515 and 50mV for the 515A.  
The maximum vertical sensitivity is 100mV/div for the 515 and 50mV for the 515A.
The [[516]] is essentially a dual-trace version of the 515.


* [http://w140.com/mmm/tek-515.pdf Tektronix 515 Manual (PDF)]
* [http://w140.com/mmm/tek-515.pdf Tektronix 515 Manual (PDF)]

Revision as of 10:16, 19 November 2011

The Tektronix 515 is a 15MHz single-trace all-tube oscilloscope. It does not use plug-ins. A rackmount version, the RM15 was also sold. There is also a 515A. The HV power supply uses tree 5642 rectifiers to produce +2325V for the CRT anode and -1675V for the CRT cathode. The LV power supply is linear, using a 6080 tube as the pass tube of the series regulator for +300V and +100V supply. The -150V supply is regulated by a 6AU5 tube. The voltage reference for the -150V supply is a 5651 tube. The 515 and 515A use selenium rectifiers. A kit was later made available for converting them to silicon rectifiers for improved reliability.

The vertical amplifier is fully differential, DC-coupled, and all tube. The stages are as follows:

  • input buffer, cathode followers, 6AU6
  • first gain stage, differential amplifier, T-coil, 12BY7
  • unity gain buffer, cathode follower, 6DJ8
  • output amplifier, differential amplifier, T-coil, 6CL6

The horizontal amplifier uses half of a 6DJ8 as a buffer, followed by a 6DJ8 as a differential amplifier and phase splitter, followed by the two halves of another 6DJ8 as the output cathode followers driving the horizontal CRT deflection plates.

The trigger is a 6DJ8 differential trigger amplifier followed by a 6DJ8 Schmitt trigger.

The 515A has a Z-axis input and slightly higher vertical sensitivity than the 515. The maximum vertical sensitivity is 100mV/div for the 515 and 50mV for the 515A. The 516 is essentially a dual-trace version of the 515.