31,996
edits
No edit summary |
No edit summary |
||
Line 18: | Line 18: | ||
* Pin 8: +180V, unregulated | * Pin 8: +180V, unregulated | ||
The 517 makes extensive use of the [[distributed amplifier]] concept. The vertical signal path is | The 517 makes extensive use of the [[distributed amplifier]] concept. | ||
as follows: | It was originally designed to use the 5XP CRT, | ||
which has 38V/cm vertical deflection sensitivity when operated with 24kV acceleration voltage. | |||
The vertical sensitivity at the input connector is 0.1V/cm. So the voltage gain is 380. | |||
For 4cm deflection, a 152-volt differential output swing is required. | |||
The vertical signal path is as follows: | |||
* Gain Stage 1: single-ended, six sections, distributed, [[6AK5]] pentodes | * Gain Stage 1: single-ended, six sections, distributed, [[6AK5]] pentodes | ||
Line 47: | Line 51: | ||
other Tek scopes which use HV oscillators in the ultrasonic range. | other Tek scopes which use HV oscillators in the ultrasonic range. | ||
The power consumption of a 517 is 1250 Watts. The indicator unit weighs 76 pounds and the external | |||
power supply weighs 72 pounds. | |||
* [http://w140.com/MILSPEC_High_Speed_Scope.pdf Final Report on Tektronix MILSPEC High Speed Scope] | * [http://w140.com/MILSPEC_High_Speed_Scope.pdf Final Report on Tektronix MILSPEC High Speed Scope] |