520: Difference between revisions
No edit summary |
No edit summary |
||
(3 intermediate revisions by 2 users not shown) | |||
Line 9: | Line 9: | ||
|introduced=1967 | |introduced=1967 | ||
|discontinued=(?) | |discontinued=(?) | ||
|designers= | |designers=Phil Crosby;Ron Olson | ||
|manuals= | |manuals= | ||
* [[Media:070-0639-02.pdf|Tektronix 520 Manual]] | * [[Media:070-0639-02.pdf|Tektronix 520 Manual]] | ||
* [[Media:070-1709-00.pdf|Tektronix 520A Manual]] | * [[Media:070-1709-00.pdf|Tektronix 520A Manual]] | ||
* [[Media:Tek 520 pal fcp sept 1968.pdf | Tektronix 520 PAL Factory Calibration Procedure, September 1968 ( | * [[Media:Tek 520 pal fcp sept 1968.pdf | Tektronix 520 PAL Factory Calibration Procedure, September 1968]] (needs OCR) | ||
* [https://w140.com/tek_520_cat.pdf Tektronix 520 Entry in 1968 Catalog | * [https://w140.com/tek_520_cat.pdf Tektronix 520 Entry in 1968 Catalog] | ||
}} | }} | ||
The '''Tektronix 520''' is a vectorscope [[introduced in 1967]]. | The '''Tektronix 520''' is a vectorscope [[introduced in 1967]]. Versions were made for NTSC and for PAL. | ||
Versions were made for NTSC and for PAL. | |||
[[Phil Crosby]] was the project lead and designed the demodulation circuitry. | [[Phil Crosby]] was the project lead and designed the demodulation circuitry. [[Ron Olson]] designed the sweep. | ||
[[Ron Olson]] designed the sweep. | |||
The HV oscillator's power transistor is mounted to the rear panel. | |||
Since its collector has 40 kHz with tens of volts peak-to-peak a decision was made to add metal plating to the transistor's Bakelite cover to prevent EMI. | |||
Unexpectedly, the outgassing from the Bakelite caused the metal plating to blister, which shorted the collector to the case. | |||
When this problem was discovered, the metal plating was removed from the design. In hindsight, the designers didn't believe the plating was necessary in the first place. | |||
{{MissingSpecs}} | {{MissingSpecs}} | ||
==Pictures== | ==Pictures== | ||
Line 51: | Line 56: | ||
</gallery> | </gallery> | ||
{{Parts|520}} | |||
[[Category:TV vectorscopes]] | [[Category:TV vectorscopes]] |
Revision as of 11:42, 10 July 2022
The Tektronix 520 is a vectorscope introduced in 1967. Versions were made for NTSC and for PAL.
Phil Crosby was the project lead and designed the demodulation circuitry. Ron Olson designed the sweep.
The HV oscillator's power transistor is mounted to the rear panel. Since its collector has 40 kHz with tens of volts peak-to-peak a decision was made to add metal plating to the transistor's Bakelite cover to prevent EMI. Unexpectedly, the outgassing from the Bakelite caused the metal plating to blister, which shorted the collector to the case. When this problem was discovered, the metal plating was removed from the design. In hindsight, the designers didn't believe the plating was necessary in the first place.
Key Specifications
- please add
Pictures
520
-
520 catalog image
-
-
520 PAL version
520A
Some Parts Used in the 520
Part | Part Number(s) | Class | Description | Used in |
---|---|---|---|---|
T5201 | 154-0513-00 • 154-0513-01 • 154-0513-02 • 154-0513-03 | CRT | CRT with special graticule | 520 • 521 • 522 |