536: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 7: Line 7:
discontinued=1973 |
discontinued=1973 |
manuals=
manuals=
* [http://bama.edebris.com/manuals/tek/536 Tektronix 536 Manual (1961 edition, PDF)]
* [[Media:070-270.pdf | Tektronix 536 Manual (1961 edition, PDF, OCR)]]
* [http://w140.com/Tektronix_536_Oscilloscope_Manual_Dec1970_070-0270-01.pdf Tektronix 536 Manual (1970 edition, PDF)]
* [[Media:070-0270-01.pdf | Tektronix 536 Manual (1970 edition, PDF, OCR)]]
* [http://w140.com/tek_fcp/tek_type_536_early_factory_cal_proc.pdf Tektronix 536 Factory Calibration Procedure low-sn (PDF)]
* [[Media:Tek_536_fcp.pdf | Tektronix 536 Factory Calibration Procedure low-sn (PDF, OCR)]]
* [http://w140.com/tek_fcp/tek_type_536_late_factory_cal_proc.pdf Tektronix 536 Factory Calibration Procedure high-sn (PDF)]
* [[Media:Tek_536_fcp_high-sn.pdf | Tektronix 536 Factory Calibration Procedure high-sn (PDF, OCR)]]
 
* [[Media:070-0270-01.pdf|Tektronix 536 Manual (1970 edition, PDF, OCR)]]
* [[Media:tek_536_fcp.pdf|Tektronix 536 Factory Calibration Procedure low-sn (PDF, OCR)]]
* [[Media:tek_536_fcp_high-sn.pdf|Tektronix 536 Factory Calibration Procedure high-sn (PDF, OCR)]]
}}
}}


Line 22: Line 18:


The Type 536 does not contain trigger and sweep circuitry.   
The Type 536 does not contain trigger and sweep circuitry.   
To use a 536 as a conventional oscilloscope,
To use a 536 as a conventional oscilloscope, a [[T|Type T timebase plug-in]] can be installed in the Horizontal bay.
install a [[T|Type T]] timebase plug-in in the Horizontal bay.


The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase.
The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase.

Revision as of 05:14, 8 October 2018

{{{manufacturer}}} 
11 MHz X-Y scope
Tektronix 536 front

Produced from 1957 to 1973

Manuals
Manuals – Specifications – Links – Pictures


The Tektronix Type 536 is an X-Y scope introduced in 1957 that takes two letter-series and 1-series plug-ins, one for the horizontal axis and one for the vertical axis.

The Type 536 does not contain trigger and sweep circuitry. To use a 536 as a conventional oscilloscope, a Type T timebase plug-in can be installed in the Horizontal bay.

The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase. This allows an equal bandwidth of 11 MHz in both directions. It also has a special CRT (T5360) with equal bandwidths in both directions. Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator.

Specifications

please add

Pictures