561: Difference between revisions

Jump to navigation Jump to search
847 bytes added ,  5 March 2021
m
No edit summary
(2 intermediate revisions by 2 users not shown)
Line 57: Line 57:
side of the faceplate, totally eliminating parallax errors, and allowing for better  
side of the faceplate, totally eliminating parallax errors, and allowing for better  
edge illumination.  
edge illumination.  
The 561A supports all 2 and 3 series plug-ins. 
The popular 60 and 70 series plug-ins were renamed
by adding a “2A, 2B, 3A, or 3B” in front to the two digit model number. 
New 3 series plug-ins were also added which consume more power than the original 60 and 70 series. 
Due to the higher power consumption, some of these newer plug-ins can not be used in the original 561. Mainframe compatibility can be found within the plugin manuals.
The highest bandwidth plug-ins gave a system bandwidth of 10 MHz.


The 561A was one of the mainframes offered for the [[Engine Analyzer]] package.
The 561A was one of the mainframes offered for the [[Engine Analyzer]] package.
Line 96: Line 89:
The 561S has no post-deflection acceleration, and a CRT cathode
The 561S has no post-deflection acceleration, and a CRT cathode
voltage of -3,300 V, like the other 561 models.
voltage of -3,300 V, like the other 561 models.
===Plugin Compatibility=== 
The popular 60 and 70 series plug-ins were later given a “2A, 2B, 3A, or 3B” prefix.
The highest bandwidth plug-ins gave a system bandwidth of 10 MHz when used in the 561A and 561B.
The 561A, RM561A, 561B, and RM561B are compatible with all of the 2 and 3-series plugins that Tektronix made. The 561 and RM561 have limited compatibility with some 3-series plugins, mainly due to the CRT circuit. For plugins such as the 3B1 and 3B3 time bases there are issues with the blanking and intensified sweep. The 561A and subsequent models used a dual-secondary winding transformer in the CRT power supply, with one winding used in an intensifying pulse circuit which the original 561 lacked. Other 3-series plugins may be used in the original 561 with some modifications. For example, to use a 3A74 4-channel vertical plugin in a 561 sn101to579, the +6V unregulated supply needs to be disconnected from both plugin connectors (pin 18). Later 561's with sn580 and higher already had this change implemented. More information regarding the use of 3-series plugins and the required modifications (if available) can be found in the Tektronix 561 Instrument Reference Book (IRB).


{{BeginSpecs}}
{{BeginSpecs}}
Line 167: Line 166:
561b_inside_left.jpg | left inside
561b_inside_left.jpg | left inside
561b_inside_top.jpg | top inside
561b_inside_top.jpg | top inside
 
Tek r561b.jpg|R561B
</gallery>
</gallery>


Line 185: Line 184:
Tek rm561a top inside.jpg|RM561A top inside
Tek rm561a top inside.jpg|RM561A top inside
LINC console.jpg | RM561A in LINC computer console  
LINC console.jpg | RM561A in LINC computer console  
RM561A with 3B3 and 3A74.jpg | RM561A with 3B3 and 3A74
RM561 with 3A1 and 3B4 from NASA AMES.jpg | RM561 with 3A1 and 3B4 from NASA AMES
</gallery>
</gallery>


[[Category:560 series scopes]]
[[Category:560 series scopes]]
21

edits

Navigation menu