564: Difference between revisions

Revision as of 13:21, 29 April 2018

{{{manufacturer}}}
Split-screen storage scope Tektronix 564 with 3L5 and 3B4 plugins Produced from 1962 to 1968 Manuals Tektronix 564 Manual (PDF) Tektronix 564B Manual (PDF) Tektronix 564 Manual (BAMA, PDF) Tektronix 564B Manual (BAMA, PDF) Tektronix 564B with Mod 121N Manual (BAMA, PDF) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 564 is the storage scope of the 560 series. It was introduced in June 1962.

The 564 is a bench scope. The RM564 is the rack-mount version. The 564 is a tube-based oscilloscope, whereas a later version, the 564B (1969), is fully solid state. Mod 121N added auto-erase.

The 564 was one of the mainframes offered for the Engine Analyzer package.

Steve Ditter says:

Tek offered two phosphors for the 564. You can determine which one you have by reading the CRT part number, visible in the window in the shield where the deflection plate connections are. 154-0410-00 is P200, which was the standard tube. The 154-0418-00 is the P201, which has faster writing rate, but at the expense of about 30% shorter useful life.

CRTs in the 564B were 154-0565-00 (T5641-200) and 154-0565-01 (fast writing speed), respectively.

The left plug-in directly drives the vertical deflection plates of the CRT. The right plug-in directly drives the horizontal deflection plates.

Key Specifications

please add

The 564 CRT has a total of 3500 V of acceleration. There is no post-deflection acceleration.

Links

Pictures

564

564 with 3L5 and 3B4 plugins
Tektronix 564 Front Panel
564, Display
Tektronix 564 Display (in Storage Mode)
Tektronix 564 Back
Tektronix 564 Left
Tektronix 564 Right

RM564

RM564, Switch for storage
RM564, Chassis
RM564, Chassis bottom
R564B w auto-erase and 3A6 and 3B3

564B

564B with 3A3 and 3B3
564B
564B
564B
564B
564B on cart
564B with viewing hood
564B with viewing hood

Schematics

564 Block Diagram
564 Power Supply
564 Interconnecting Sockets
564 CRT Circuit
564 Calibrator
564 Storage Circuit

Versions

564 version 1
564 version 2
564 version 3

Internals

Tektronix 564 Left Internals
Tektronix 564 Left Internals
Tektronix 564 Left Internals
Tektronix 564 Left Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals
Tektronix 564 Right Internals

Third-party

Physionic 671 Ultrasonic Imager, based on 564
Physionic 671 Ultrasonic Imager, based on 564
Physionic 671 Ultrasonic Imager, based on 564
Physionic 671 Ultrasonic Imager, based on 564
Physionic 671 Ultrasonic Imager, based on 564
Physionic 671 Ultrasonic Imager, based on 564

@@ Line 15: / Line 15: @@
 The '''Tektronix 564''' is the [[CRT_storage_scope|storage scope]]
 of the [[560-series scopes|560 series]].
-It was [[introduced in 1962|introduced in June 1962]]. The 564B was introduced in 1969.
+It was [[introduced in 1962|introduced in June 1962]].
-The left plug-in directly drives the vertical deflection plates of the CRT.
-The right plug-in directly drives the horizontal deflection plates.
 The 564 is a bench scope. The RM564 is the rack-mount version.
-The 564 is a tube-based oscilloscope, whereas a later version, the 564B (1969), is fully solid state.
+The 564 is a tube-based oscilloscope, whereas a later version, the '''564B''' (1969), is fully solid state.
 Mod 121N added auto-erase.
+The 564 was one of the mainframes offered for the [[Engine Analyzer]] package.
 Steve Ditter says:
@@ Line 33: / Line 32: @@
 </blockquote>
-The 564 was one of the mainframes offered for the [[Engine Analyzer]] package.
+CRTs in the 564B were [[154-0565-00]] (T5641-200) and [[154-0565-01]] (fast writing speed), respectively.
+The left plug-in directly drives the vertical deflection plates of the CRT.
+The right plug-in directly drives the horizontal deflection plates.
 {{MissingSpecs}}