585: Difference between revisions

From TekWiki
Jump to navigation Jump to search
m (→‎Circuit Variants: fixed typo)
(8 intermediate revisions by 3 users not shown)
Line 7: Line 7:
summary=100 MHz oscilloscope|
summary=100 MHz oscilloscope|
manuals=
manuals=
* [http://bama.edebris.com/download/tek/585/585.pdf Tektronix 585 Manual (PDF)]
* [[Media:070-171.pdf|Tektronix 585 Manual]] (PDF, OCR)
* [http://w140.com/tek_585a_serno_14416.pdf Tektronix 585A Manual (PDF)]
* [[Media:070-0391-01.pdf|Tektronix 585A Manual]] (PDF)
* ''070-0392-00.pdf RM585A Manual needed''
* [[Media:070-427.pdf|Tektronix 585A Operator's Manual]] (4"×5", PDF)
<small>
 
'''Calibration'''
* [[Media:Service Scope 39 Aug 1966.pdf|580 series gain adjustment procedure, in Service Scope 39, Aug 1966]]
* [[Media:Service Scope 39 Aug 1966.pdf|580 series gain adjustment procedure, in Service Scope 39, Aug 1966]]
* [http://w140.com/585A_Operator_Manual_orig_4x5_inches.pdf Tektronix 585A Operators Handbook (PDF)]
* [http://w140.com/tek_fcp/tek_585_fac_cal.pdf Tektronix 585 Factory Calibration Procedure, June 1961 (PDF)]
* [http://w140.com/tek_fcp/tek_585_fac_cal.pdf Tektronix 585 Factory Calibration Procedure, June 1961 (PDF)]
* [[Media:Tek 585a fcp nov 1968.pdf|Tektronix 585A Factor Calibration Procedure, November 1968 (PDF)]]
* [[Media:Tek 585a fcp nov 1968.pdf|Tektronix 585A Factor Calibration Procedure, November 1968 (PDF)]]
'''Modifications'''
* [http://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp  Power supply Mod (From Stan's website, archived)]
* [http://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp  Power supply Mod (From Stan's website, archived)]
</small>
}}
}}
The '''Tektronix 585''' is a 100 MHz [[580-series scopes|580-Series scope]] that Tektronix [[introduced in 1959]].
The '''Tektronix 585''' is a 100 MHz [[580-series scopes|580-Series scope]] that Tektronix [[introduced in 1959]].
Line 21: Line 28:
The 58x series were the first Tek scopes with [[distributed deflection plates]] and the last with a [[distributed amplifier]].
The 58x series were the first Tek scopes with [[distributed deflection plates]] and the last with a [[distributed amplifier]].
At 100 MHz (down-rated to 95 MHz in 1962 and 85 MHz for the 585A) with the [[80|Type 80 plug-in]] and up to 85 MHz with the dual-channel [[82|Type 82]],  
At 100 MHz (down-rated to 95 MHz in 1962 and 85 MHz for the 585A) with the [[80|Type 80 plug-in]] and up to 85 MHz with the dual-channel [[82|Type 82]],  
they were the highest-speed general purpose scopes of Tek's tube scope era (the 1 GHz [[519]] was specialized with no vertical amplifier).
they were the highest-speed general purpose scopes of Tek's tube scope era. (The 1 GHz [[519]] was specialized with no vertical amplifier.)


The 585's front panel layout is almost identical to the [[545A]] that came out at the same time. The 585 also shares internal construction and circuits such as the power supply with the [[535]]/[[545]] line of scopes.
The 585's front panel layout is almost identical to the [[545A]] that came out at the same time. The 585 also shares internal construction and circuits such as the power supply with the [[535]]/[[545]] line of scopes.
Line 31: Line 38:
{{Spec | CRT | [[T581]], distributed vertical deflection plates, 10 kV acceleration }}
{{Spec | CRT | [[T581]], distributed vertical deflection plates, 10 kV acceleration }}
{{Spec | Outputs | A Sawtooth, A Gate, B Gate, Calibrator (0.2 mV to 100 V<sub>p-p</sub>, 1−2−5) }}
{{Spec | Outputs | A Sawtooth, A Gate, B Gate, Calibrator (0.2 mV to 100 V<sub>p-p</sub>, 1−2−5) }}
{{Spec | Line Voltage/Power Consumption| 107-127 OR 214-234 V<sub>AC</sub>, 50-60 Hz, 890VA/710W}}
{{Spec | Line Voltage/Power Consumption| 107−127 or 214−234 V<sub>AC</sub>, 50-60 Hz, 890 VA / 710 W}}
{{Spec | Dimensions | (W/L/H) 13 x 24 x 17 inches }}
{{Spec | Dimensions | (W/L/H) 330×610×432 mm³ (13"×24"×17") }}


{{EndSpecs}}
{{EndSpecs}}
Line 38: Line 45:
==585A differences==
==585A differences==
The 585A uses a tunnel-diode trigger circuit (see below), adds HF Sync and AC LF reject modes to the timebase A trigger selector, and adds a [[trace rotation]] coil.
The 585A uses a tunnel-diode trigger circuit (see below), adds HF Sync and AC LF reject modes to the timebase A trigger selector, and adds a [[trace rotation]] coil.
{| class="wikitable"
<!-- Header -->
! colspan="3" | Few of the changes across 585 and 585A
|-
!
! 585
! 585A
<!-- End Header -->
<!-- Start section -->
|-style="background-color:#ffffff;"
!  rowspan="2" | A-Trigger
| SN Up-to  1070
*6EW8 Trigger comparator.
*6DJ8 Trigger multivibrator
| rowspan="2" |
*Tunnel diode trigger
*PNP trigger amplifier [[2N2048]]
|-style="background-color:#ffffff;"
| SN 1071-Up
*Tunnel diode trigger
*PNP trigger amplifier [[OC171]]
<!-- End Section -->
<!-- Start section -->
|-
!Sweep Generator
| Standard
| SN 120000-up
D152/252 added to [[6AL5]] disconnect diodes
<!-- End section -->
<!-- Start section -->
|-style="background-color:#ffffff;"
! rowspan="2"| 12.6V Power
| SN Up-to 3762
*Used for plug-in
*Selenium rectifier
| rowspan="2" |
*Used for plug-in and vertical amplifier heaters
*SN 6580-up  Fused
|-style="background-color:#ffffff;"
| SN 3763-Up 
*Used for plug-in and vertical amplifier heaters
*Minor design changes from earlier SN
<!-- End Section -->
<!-- Start section -->
|-
! rowspan="2"| Vertical amplifier
grind/plate line fuses
| SN Up-to 3762 No Fuse
| rowspan="2" |  Fused
|-
| SN 3763-Up - added F1210, F1260, F1285
<!-- End Section -->
<!-- Start section -->
|-style="background-color:#ffffff;"
! rowspan="2"| Delay Relay
| rowspan="2"|  6NO45
*Heater power from unregulated 18V DC
* 33Ω dropping resistor.
| SN Up-to 9179
*6NO45
*Heater power from unregulated 18V DC
* 33Ω dropping resistor.
|-style="background-color:#ffffff;"
| SN 9180-Up
*18NO30
*Heater power from unregulated 18V DC
|-
<!-- End Section -->
<!-- Start section -->
|-
! Trace Rotation
| Not present
| SN 9000-Up - Added trace rotation
|-
<!-- End Section -->
<!-- Start section -->
|-style="background-color:#ffffff;"
! Final vertial power amp
|  [[6939]]/AX193/7699 dual tetrode
| 2 X [[7788]] Pentode
|-
<!-- End Section -->
<!-- Start section -->
|-
! Power supply Mod
| None
| SN 9250-Up Main relay K601-4 relocated [http://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp  Details]
|-
<!-- End Section -->
! colspan="3" |SN Range not applicable for rackmount models
|-
|}


==Links==
==Links==
Line 215: Line 124:
Rackmount versions were also made, the RM585 and RM585A.
Rackmount versions were also made, the RM585 and RM585A.


==Prices==
===Circuit Variants===
{|
 
{| class="wikitable"
<!-- Header -->
! colspan="3" | Few of the changes across 585 and 585A
|-
|-
|
!
{| class="wikitable"
! 585
! 585A
<!-- End Header -->
<!-- Start section -->
|-style="background-color:#ffffff;"
!  rowspan="2" | A-Trigger
| SN up to 1070
*[[6EW8]] Trigger comparator.
*[[6DJ8]] Trigger multivibrator
| rowspan="2" |
*Tunnel diode trigger
*PNP trigger amplifier [[2N2048]]
|-style="background-color:#ffffff;"
| SN 1071 up
*Tunnel diode trigger
*PNP trigger amplifier [[OC171]]
<!-- End Section -->
<!-- Start section -->
|-
|-
| &nbsp;
!Sweep Generator
| colspan="2" align="center" | 585
| Standard
| colspan="1" align="center" | 585A
| SN 120000 up
D152/252 added to [[6AL5]] disconnect diodes
<!-- End section -->
 
<!-- Start section -->
|-style="background-color:#ffffff;"
! rowspan="2"| 12.6 V Power
| SN up to 3762
*Used for plug-in
*Selenium rectifier
| rowspan="2" |
*Used for plug-in and vertical amplifier heaters
*SN 6580 up  Fused
|-style="background-color:#ffffff;"
| SN 3763 up 
*Used for plug-in and vertical amplifier heaters
*Minor design changes from earlier SN
<!-- End Section -->
 
<!-- Start section -->
|-
|-
! Year
! rowspan="2"| Vertical amplifier
! 1959
grid/plate line fuses
! 1962
| SN up to 3762: No Fuse
! 1963
| rowspan="2" |  Fused
|-
|-
! mainframe only
| SN 3763 up: Added F1210, F1260, F1285
|align=right| $1,675
<!-- End Section -->
|align=right$1,725
<!-- Start section -->
|align=right| $1,725
|-style="background-color:#ffffff;"
! rowspan="2"| Delay Relay
| rowspan="2"[[6NO45]]
*Heater power from unregulated 18 V DC
* 33 Ω dropping resistor.
| SN up to 9179
*[[6NO45]]
*Heater power from unregulated 18 V DC
 
* 33 Ω dropping resistor.
|-style="background-color:#ffffff;"
| SN 9180 up
*[[18NO30]]
*Heater power from unregulated 18 V DC
|-
|-
! 2020 value''**''
<!-- End Section -->
|align=right| $14,890
 
|align=right| $14,780
<!-- Start section -->
|align=right| $14,580
|-
|-
! mainframe+[[80]]+[[P80]]
! Trace Rotation
|align=right|  $1,825
| Not present
|align=right|  $1,875
| SN 9000 up: Added trace rotation
|align=right|  $1,975
|-
|-
! 2020 value''**''
<!-- End Section -->
|align=right| $16,220
 
|align=right| $16,060
<!-- Start section -->
|align=right| $16,700
|-style="background-color:#ffffff;"
|}
! Final vertical power amp
|
| [[6939]]/AX193/7699 dual tetrode
{| class="wikitable"
| 2 × [[7788]] Pentode
|-
|-
| &nbsp;
<!-- End Section -->
| colspan="3" align="center" | 585A
 
<!-- Start section -->
|-
|-
! Year
! Power supply Mod
! 1965
| None
! 1969
| SN 9250 up: Main relay K601-4 relocated [http://web.archive.org/web/20170727004536/http://www.reprise.com/host/tektronix/reference/581_relay.asp  Details]
|-
|-
! mainframe only
<!-- End Section -->
|align=right|  $1,725
! colspan="3" |SN Range not applicable for rack-mount models
|align=right|  $1,800
|-
! 2020 value''**''
|align=right| $14,170
|align=right| $12,690
|-
|-
! mainframe+[[86]]+[[P6008]]
|align=right|  $2,075
|align=right|  $2,185
|-
! 2020 value''**''
|align=right| $17,040
|align=right| $15,400
|}
|}
|
 
==Prices==
 
{| class="wikitable"
{| class="wikitable"
|-
|-
| &nbsp;
| colspan="2" |  &nbsp;
| colspan="3" align="center" | 585A
| colspan="2" align="center" | 585
| colspan="4" align="center" | 585A
|-
|-
! Year
! colspan="2" | Year
! 1959
! 1962
! 1963
! 1965
! 1965
! 1969
! 1969
! 1971*
! 1971*
|-
|-
! mainframe only
! rowspan="2"| mainframe only
| catalog
|align=right|  $1,675
|align=right|  $1,725
|align=right|  $1,725
|align=right|  $1,725
|align=right|  $1,725
|align=right|  $1,800
|align=right|  $1,800
|align=right|  $3,325
|align=right|  $3,325
|-
|-
! 2020 value''**''
| 2020''**''
|align=right| $14,890
|align=right| $14,780
|align=right| $14,580
|align=right| $14,170
|align=right| $14,170
|align=right| $12,690
|align=right| $12,690
|align=right| $15,330
|align=right| $15,330
|-
|-
! mainframe+[[82]]
! rowspan="2"| mainframe+[[80]]+[[P80]]
| catalog
|align=right|  $1,825
|align=right|  $1,875
|align=right|  $1,975
|-
| 2020''**''
|align=right| $16,220
|align=right| $16,060
|align=right| $16,700
|-
! rowspan="2"| mainframe+[[82]]
| catalog
|
|
|
|align=right|  $2,375
|align=right|  $2,375
|align=right|  $2,575
|align=right|  $2,575
|align=right|  $3,325
|align=right|  $3,325
|-
|-
! 2020 value''**''
| 2020''**''
|
|
|
|align=right| $19,500
|align=right| $19,500
|align=right| $18,150
|align=right| $18,150
|align=right| $21,240
|align=right| $21,240
|-
!  rowspan="2"| mainframe+[[86]]+[[P6008]]
| catalog
|
|
|
|align=right|  $2,075
|align=right|  $2,185
|
|-
| 2020''**''
|
|
|
|align=right| $17,040
|align=right| $15,400
|
|}
|}
|}
 
:''* "limited demand" instrument''
:''* "limited demand" instrument''
:''** original list price corrected for inflation''
:''** original list price corrected for inflation''
Line 318: Line 314:
Tek-585-82.jpg          | 585 with [[82|Type 82 plug-in]]
Tek-585-82.jpg          | 585 with [[82|Type 82 plug-in]]
Tek 585 with 82.jpg      | 585 with [[82|Type 82 plug-in]]
Tek 585 with 82.jpg      | 585 with [[82|Type 82 plug-in]]
Tek 585 non A Field Modification 040-275 label.jpg | Front panel label indicating Field Modification 040-275 is applied
</gallery>
</gallery>
===585 non-A Internals===
===585 non-A Internals===
Line 370: Line 367:
<gallery>
<gallery>
Rm 585a.jpg|RM-585A
Rm 585a.jpg|RM-585A
Tek_RM585A-Front.jpeg | RM585A - ALT/DLYD' Trigger
Tek_RM585A-Back.jpeg | RM585A - Rear
</gallery>
</gallery>
===RM585A Internals===
===RM585A Internals===
Line 382: Line 382:
Tek_RM585A_Int_Rear.jpeg | RM585A Internal - Rear
Tek_RM585A_Int_Rear.jpeg | RM585A Internal - Rear
Tek_585A_VOutput-Tubes.jpeg | RM585A Internal - Vamp - Output [[7788]] pair
Tek_585A_VOutput-Tubes.jpeg | RM585A Internal - Vamp - Output [[7788]] pair
RM585A_12.6V-Recrifier.jpeg | 12.6V Silicon diode rectifier with fuse
RM585A_12.6V-Recrifier.jpeg | 12.6 V rail silicon diode rectifier with fuse
RM585A_T44-Trigger-Transformer.jpeg | T44 - Trigger coupling transformer (Tunnel diode trigger)
RM585A_T44-Trigger-Transformer.jpeg | T44 - Trigger coupling transformer (Tunnel diode trigger)
RM585A_12.6V-regulator.jpeg | 12.6 Volt regulator transistors
RM585A_12.6V-regulator.jpeg | 12.6 V rail regulator transistors
RM585A_18V-delayrelay.jpeg | Delay relay 18NO30T
RM585A_18V-delayrelay.jpeg | Delay relay 18NO30T
Tek_585A_Trigger-Amp-transistor.jpeg| Trigger amplifier transistor 2N2048
Tek_585A_Trigger-Amp-transistor.jpeg| Trigger amplifier transistor 2N2048
Tek_585A_Vamp-Plate-Line-Termination.jpeg| Plate line termination (post deflection plates)
Tek_585A_Vamp-Plate-Line-Termination.jpeg| Plate line termination (post deflection plates)
Tek_585A_T1046-transformer.jpeg | T1046 Troid transformer in Vamp, used for phase correction/common mode choke  
Tek_585A_T1046-transformer.jpeg | T1046 toroid transformer in V-amp, used as phase correction/common mode choke  
Tek_585A_Grid_Line.jpeg | Tek 585A V-amp grid line (Delay Line driver stage)
Tek_585A_Grid_Line.jpeg | Tek 585A V-amp grid line (Delay Line driver stage)
Tek_585A_Plate_Line.jpeg | Tek 585A plate line  (partial, delay Line driver stage)
Tek_585A_Plate_Line.jpeg | Tek 585A plate line  (partial, delay Line driver stage)

Revision as of 11:53, 3 June 2021

{{{manufacturer}}} 
100 MHz oscilloscope
Tektronix 585

Produced from 1959 to 1972

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 585 is a 100 MHz 580-Series scope that Tektronix introduced in 1959. The 581 is the same with a single timebase. The 585A facelift model was introduced in 1963 and discontinued after 1971.

The 58x series were the first Tek scopes with distributed deflection plates and the last with a distributed amplifier. At 100 MHz (down-rated to 95 MHz in 1962 and 85 MHz for the 585A) with the Type 80 plug-in and up to 85 MHz with the dual-channel Type 82, they were the highest-speed general purpose scopes of Tek's tube scope era. (The 1 GHz 519 was specialized with no vertical amplifier.)

The 585's front panel layout is almost identical to the 545A that came out at the same time. The 585 also shares internal construction and circuits such as the power supply with the 535/545 line of scopes.

Key Specifications

Rise time 3.5 ns with Type 80 plugin and P80 probe
Timebase A 50 ns/Div to 2 s/Div, 1−2−5, variable ×2.5, magnifier ×5, single sweep; X input
Timebase B 2 μs/Div to 1 s/Div, 1−2−5, can delay timebase A by 1 μs to 10 s
CRT T581, distributed vertical deflection plates, 10 kV acceleration
Outputs A Sawtooth, A Gate, B Gate, Calibrator (0.2 mV to 100 Vp-p, 1−2−5)
Line Voltage/Power Consumption 107−127 or 214−234 VAC, 50-60 Hz, 890 VA / 710 W
Dimensions (W/L/H) 330×610×432 mm³ (13"×24"×17")

585A differences

The 585A uses a tunnel-diode trigger circuit (see below), adds HF Sync and AC LF reject modes to the timebase A trigger selector, and adds a trace rotation coil.

Links

History

John Kobbe says:

Later on there was another special CRT designed with distributed vertical deflection for the 100 Megahertz 580 (well almost 100 MHz). The 580 was the first to, at least at Tek, to use a cross wound continuous signal delay line. The 580 used a similar horizontal system lifted from the 530’s which was too slow and insufficient writing rate. The active probe and plug in system left a lot to be desired. I wasn’t very proud of the 580 design as it was too compromised.

Internals

Plug-in Interface

The 585 uses 580-series plug-ins which look like letter-series and 1-series plug-ins but are electrically different. The main difference is the impedance of the signal that passes through the interface from the plug-in to the mainframe. In 530/540/550-series scopes, the plug-in expects the mainframe to be a high impedance load, driving tube grids in the mainframe. The 580 Series plug-in interface, on the other hand, presents a differential transmission line input with an impedance of 93 Ω per side, going into the first distributed amplifier stage. The other end of this transmission line is returned to the plug-in for termination and biasing. The pin-out of the interface connector is also different, the 580-series pin-out being essentially flipped 180° from its 530/540/550 series counterparts (Signal Out is between pins 14 and 16 as opposed to between pins 1 and 3, etc.)

The Type 81 adapter allows the use of letter-series and 1-series plug-ins in a 585.

Trigger Circuit

The original 585 (up to serial number 1070) has an "A" trigger circuit that has a differential trigger amplifier made of a pair of 6EW6 miniature pentodes, followed by a Schmitt trigger made of a pair of miniature dual triode tubes.

Starting at serial number 1071 (and sometimes retrofitted to earlier instruments), the dual-triode Schmitt trigger circuit was replaced by an STD615 10 mA tunnel diode AC-coupled to the base-emitter junction of an OC171 germanium PNP transistor as a pulse amplifier.

The slower "B" timebase uses a Schmitt trigger circuit.

Vertical Signal Path

Like the 545, 551, and 555, the 585 uses two distributed amplifiers in the vertical signal path, one with seven differential 6DJ8 stages driving a helically-wound, differential delay line, followed by a five-stage differential distributed driver amplifier and a 7699 or 6939 dual tetrode power stage driving the CRT.

Unlike the other 500-series scopes, the 585 uses a CRT with distributed vertical deflection plates, the T581, enabling it to have both fast rise time and high sensitivity (~5 V/cm vertically), albeit at the cost of limiting vertical deflection to slightly over 4 cm. Total acceleration voltage is 10 kV.

Several improvements were published for the 585 circuitry, including the enhanced trigger circuit. If all of those changes are applied to a 585, it is essentially a 585A.

After serial number 2585, the back termination of the final distributed amplifier output was made adjustable. The manual says this (field-installable) modification (040-275) is "required for proper operation of plug-ins with numbers above Type 81". Non-A instruments with this termination have a front panel label reading "standardized vertical".

Power Supply

The 585 power supply is similar to other Tek scopes of the era such as the 549. A linear regulator with a 5651 reference tube, a 12AX7/6AU6 error amplifier and three parallel 12B4 series pass tubes produces −150 V. This is the only adjustable rail, all other regulated voltages are referenced to it. The +100 V and +350 V regulators use half a 6080 each as the pass element, the +225 V two. In the +500 V path, a 12B4 performs this function. The unregulated +325 V input to the 225 V regulator is used to supply the HV oscillator, a 6AU5.

A transistor-based regulator supplies a +12.6 V heater voltage to the plug-in.

A 6NO45 delay relay controls a multi-contact relay to switch supply voltages on only after the tubes are warmed up. When the main relay engages, the delay relay is cut out so it will be ready to delay again even after a quick interrupt in power input.

12.6 V power supply regulation is referenced from +100V regulated output. Since +100V is not available during the warm-up period, an unregulated +100 V (~+180 V) is fed as the reference to 12.6 V power supply during warmup period. This is cut out by the multi-contact relay post warmup.

The 585 contains a 53°C (128°F) thermal cutoff.

Semiconductors

The 585 uses semiconductor diodes as rectifiers and germanium transistors in the 12.6 V power supply, and except for unmodified instruments before SN 1070, a tunnel diode and another germanium transistor in the time base A trigger circuit.

Rackmount Versions

Rackmount versions were also made, the RM585 and RM585A.

Circuit Variants

Few of the changes across 585 and 585A
585 585A
A-Trigger SN up to 1070
  • 6EW8 Trigger comparator.
  • 6DJ8 Trigger multivibrator
  • Tunnel diode trigger
  • PNP trigger amplifier 2N2048
SN 1071 up
  • Tunnel diode trigger
  • PNP trigger amplifier OC171
Sweep Generator Standard SN 120000 up

D152/252 added to 6AL5 disconnect diodes

12.6 V Power SN up to 3762
  • Used for plug-in
  • Selenium rectifier
  • Used for plug-in and vertical amplifier heaters
  • SN 6580 up Fused
SN 3763 up
  • Used for plug-in and vertical amplifier heaters
  • Minor design changes from earlier SN
Vertical amplifier

grid/plate line fuses

SN up to 3762: No Fuse Fused
SN 3763 up: Added F1210, F1260, F1285
Delay Relay 6NO45
  • Heater power from unregulated 18 V DC
  • 33 Ω dropping resistor.
SN up to 9179
  • 6NO45
  • Heater power from unregulated 18 V DC
  • 33 Ω dropping resistor.
SN 9180 up
  • 18NO30
  • Heater power from unregulated 18 V DC
Trace Rotation Not present SN 9000 up: Added trace rotation
Final vertical power amp 6939/AX193/7699 dual tetrode 2 × 7788 Pentode
Power supply Mod None SN 9250 up: Main relay K601-4 relocated Details
SN Range not applicable for rack-mount models

Prices

  585 585A
Year 1959 1962 1963 1965 1969 1971*
mainframe only catalog $1,675 $1,725 $1,725 $1,725 $1,800 $3,325
2020** $14,890 $14,780 $14,580 $14,170 $12,690 $15,330
mainframe+80+P80 catalog $1,825 $1,875 $1,975
2020** $16,220 $16,060 $16,700
mainframe+82 catalog $2,375 $2,575 $3,325
2020** $19,500 $18,150 $21,240
mainframe+86+P6008 catalog $2,075 $2,185
2020** $17,040 $15,400
* "limited demand" instrument
** original list price corrected for inflation

Pictures

585 non-A

585 non-A Internals

585A

585A Internals

RM585A

RM585A Internals