602: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (→top: clean up, replaced: {{Oscilloscope Sidebar → {{Oscilloscope Sidebar |manufacturer=Tektronix |designers=, title=Tektronix → model=) |
||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | | {{Oscilloscope Sidebar |manufacturer=Tektronix |designers= | | ||
model= 602 | | |||
summary=X-Y Display | | summary=X-Y Display | | ||
image=Tek 602 2.jpg | | image=Tek 602 2.jpg | | ||
Revision as of 07:47, 9 August 2021
The Tektronix 602 is an X-Y display.
It has differential X and Y inputs, each with 100 mV/div sensitivity.
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current.
The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.
Specifications
please add
Pictures
-
Front
-
-
Top internal
-
Rear
-
-
Deflection Amplifiers
