602: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:
|designers=  
|designers=  
|manuals=
|manuals=
* [http://w140.com/IS44_Tektronix_602_display_unit.pdf Tektronix 602 Manual (PDF)]
* [[Media:070-0799-00.pdf|Tektronix 602 Manual]] (PDF)
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602]
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602]
* [[Media:Tek 602 fcp august 1968.pdf|Tektronix 602 Factory Calibration Procedure, August 1968 (PDF)]]
* [[Media:Tek 602 fcp august 1968.pdf|Tektronix 602 Factory Calibration Procedure, August 1968 (PDF)]]

Revision as of 11:27, 18 August 2021

Tektronix 602
X-Y Display
Tektronix 602

Produced from 1969 to 1978

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 602 is an X-Y display.

It has differential X and Y inputs, each with 100 mV/div sensitivity.

The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current.

The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.

Specifications

please add

Pictures