602: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
(15 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | |||
|manufacturer=Tektronix | |||
|series=600-series monitors | |||
|model=602 | |||
|summary=X-Y Display | |||
( | |image=Tek 602 2.jpg | ||
|caption=Tektronix 602 | |||
|introduced=1969 | |||
|discontinued=1978 | |||
|designers=Bob Shand; | |||
|manuals= | |||
* [[Media:070-0799-00.pdf|Tektronix 602 Manual]] (PDF) | |||
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602] | |||
* [[Media:Tek 602 fcp august 1968.pdf|Tektronix 602 Factory Calibration Procedure, August 1968 (PDF)]] | |||
}} | |||
The '''Tektronix 602''' is an X-Y display. | |||
It has differential X and Y inputs, each with 100 mV/div sensitivity. | |||
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. | |||
The standard [[phosphor]] is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. | |||
The trace width is 14 mils at 0.5 μA beam current. | |||
The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode. | |||
==Specifications== | |||
[[Category:Specifications needed]] | |||
''please add'' | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek 602 2.jpg|Front | |||
Tek 602 trace.jpg | |||
Tek 602 1.jpg|Top internal | |||
Tek 602 3.jpg|Rear | |||
Tek 602 rear2.jpg | |||
Tek 602 deflection.png|Deflection Amplifiers | |||
Tek602.jpg|602 with vectorscope graticule | |||
Tek602grat.jpg|602 showing illuminated 8x10 graticule | |||
</gallery> | </gallery> | ||
[[Category:600 series CRT monitors]] |
Revision as of 20:08, 21 November 2021
The Tektronix 602 is an X-Y display.
It has differential X and Y inputs, each with 100 mV/div sensitivity.
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current.
The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.
Specifications
please add
Pictures
-
Front
-
-
Top internal
-
Rear
-
-
Deflection Amplifiers
-
602 with vectorscope graticule
-
602 showing illuminated 8x10 graticule