602: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The Tektronix 602 is an X-Y display.   
{{Oscilloscope Sidebar
It has differential X and Y inputs, each with 100mV/div sensitivity.
|manufacturer=Tektronix
The bandwidth of the X and Y amplifiers is 1MHz, and their phase response
|series=600-series monitors
is matched within 1 degree from DC to 1MHz.  The standard [[phosphor]] is P31
|model=602
(yellowish green, medium-short persistence).  P7 phosphor  
|summary=X-Y Display
(blueish white, long persistence) was optional.  The trace width is 14 mils at
|image=Tek 602 2.jpg
0.5uA beam current.  The 602 has a linear power supply.  The CRT does not use
|caption=Tektronix 602
post-deflection acceleration, and has -3830 volts on the cathode.  
|introduced=1969
|discontinued=1978
|designers=Bob Shand;
|manuals=
* [[Media:070-0799-00.pdf|Tektronix 602 Manual]] (PDF)
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602]
* [[Media:Tek 602 fcp august 1968.pdf|Tektronix 602 Factory Calibration Procedure, August 1968 (PDF)]]
}}
The '''Tektronix 602''' is an X-Y display.   
 
It has differential X and Y inputs, each with 100 mV/div sensitivity.
 
The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz.   
The standard [[phosphor]] is P31 (yellowish green, medium-short persistence).  P7 phosphor (blueish white, long persistence) was optional.   
The trace width is 14 mils at 0.5 μA beam current.   
 
The 602 has a linear power supply.  The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.  


* [http://w140.com/IS44_Tektronix_602_display_unit.pdf Tektronix 602 Manual (PDF)]
==Specifications==
* [http://www.bitsavers.org/pdf/dec/unibus/EK-AA11K-TM-001_Jul76.pdf DEC Manual Discussing the Tek 602]
[[Category:Specifications needed]]
''please add''


==Pictures==
<gallery>
<gallery>
Image:Tek 602 2.jpg|Front
Tek 602 2.jpg|Front
Image:Tek 602 1.jpg|Top internal
Tek 602 trace.jpg
Image:Tek 602 3.jpg|Rear
Tek 602 1.jpg|Top internal
Image:Tek 602 deflection.png|Deflection Amplifiers
Tek 602 3.jpg|Rear
Tek 602 rear2.jpg
Tek 602 deflection.png|Deflection Amplifiers
Tek602.jpg|602 with vectorscope graticule
Tek602grat.jpg|602 showing illuminated 8x10 graticule
</gallery>
</gallery>
[[Category:600 series CRT monitors]]

Revision as of 20:08, 21 November 2021

Tektronix 602
X-Y Display
Tektronix 602

Produced from 1969 to 1978

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 602 is an X-Y display.

It has differential X and Y inputs, each with 100 mV/div sensitivity.

The bandwidth of the X and Y amplifiers is 1 MHz, and their phase response is matched within 1 degree from DC to 1 MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5 μA beam current.

The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.

Specifications

please add

Pictures