602: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
It has differential X and Y inputs, each with 100mV/div sensitivity. | It has differential X and Y inputs, each with 100mV/div sensitivity. | ||
The bandwidth of the X and Y amplifiers is 1MHz, and their phase response | The bandwidth of the X and Y amplifiers is 1MHz, and their phase response | ||
is matched within 1 degree from DC to 1MHz. The standard phosphor is P31 | is matched within 1 degree from DC to 1MHz. The standard [[phosphor]] is P31 | ||
(yellowish green, medium-short persistence). P7 phosphor | (yellowish green, medium-short persistence). P7 phosphor | ||
(blueish white, long persistence) was optional. The trace width is 14 mils at | (blueish white, long persistence) was optional. The trace width is 14 mils at |
Revision as of 11:09, 3 July 2011
The Tektronix 602 is an X-Y display. It has differential X and Y inputs, each with 100mV/div sensitivity. The bandwidth of the X and Y amplifiers is 1MHz, and their phase response is matched within 1 degree from DC to 1MHz. The standard phosphor is P31 (yellowish green, medium-short persistence). P7 phosphor (blueish white, long persistence) was optional. The trace width is 14 mils at 0.5uA beam current. The 602 has a linear power supply. The CRT does not use post-deflection acceleration, and has -3830 volts on the cathode.
-
Front
-
Top internal
-
Rear
-
Deflection Amplifiers