7603: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
(36 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar|
{{Oscilloscope Sidebar
title=Tektronix 7603|
|manufacturer=Tektronix
image=Tek-7603-front.jpg|
|series=7000-series scopes
caption=Tektronix 7603 |
|model=7603
introduced=1973 |
|summary=100 MHz non-storage mainframe
discontinued=1990 |
|image=7603-4trace.jpg
summary=100 MHz non-storage mainframe|
|caption=Tektronix 7603
manuals=
|introduced=1972
* [http://bama.edebris.com/download/tek/7603/Tektronix_7603_Service_Nov1977.pdf Tektronix 7603 Manual (PDF, 35 MB)]
|discontinued=1990
* [http://www.ko4bb.com/manuals/download.php?file=Tektronix/Tektronix_-_76x3_Oscilloscope/Tektronix_7603_Service_Nov1977-hi-res.pdf Tektronix 7603 Manual (hires PDF, 60 MB)]
|designers=
|manuals=
* [[Media:Tek7603-r7603.pdf|7603/R7603 spec sheet]]
* [[Media:Tek7603-r7603.pdf|7603/R7603 spec sheet]]
* [[Media:070-1429-00.pdf|Tektronix 7603 Manual]] (PDF, OCR)
* [[Media:7603 PS Check.PDF|LVPS layout, help indications for testing]]
* [[Media:Tek 7603 power supply A10 and A11 schematic (redrawn).pdf|Newly drawn clear version of LVPS schematic]]
* <small>[http://bama.edebris.com/download/tek/7603/Tektronix_7603_Service_Nov1977.pdf Tek 7603 Manual] (PDF) @ BAMA</small>
<small>
'''Modifications'''
* [[Media:7603mod36005.pdf|Mod. 36005 (1979): Prevent >1 GHz oscillations in vertical amplifier]]
* [[040-0686-01|040-0686-01 (1984): Add pushbutton illumination for plugins]]
* [[Media:040-0654-02.pdf|040-0654-02 (1980): Add Readout]]
* [[Media:040-0970-00.pdf|040-0970-00 (1980): Add Fan]]
* [[Media:050-0550-00.pdf|050-0550-00 (1979): HV multiplier replacement]]
* [[Media:050-1449-01.pdf|050-1449-01 (1981): Fuse F1000 replacement]]
* [[Media:050-1474-00.pdf|050-1474-00 (1981): P31 phosphor CRT replacement]]
</small>
}}
}}
 
The '''Tektronix 7603''' is a general-purpose 100 MHz non-storage, large-screen scope that takes
The '''Tektronix 7603''' is a general-purpose 100 MHz non-storage, large screen scope that takes
two [[7000-series_plug-ins#Vertical plug-ins|7000-series vertical plug-ins]]
two [[7000-series_plug-ins#Vertical plug-ins|7000-series vertical plug-ins]]
and one [[7000-series_plug-ins#Horizontal plug-ins|7000-series horizontal plug-in]].   
and one [[7000-series_plug-ins#Horizontal plug-ins|7000-series horizontal plug-in]].   


The '''AN/USM 281C''' is a ruggedized 7603 without readout (was also known as 7603N Option 11S) that includes two AM-6565 ([[7A15AN11]]) single-trace amplifiers, a TD-1085 ([[7B53AN11]]) dual time base, and a clip-on front panel cover with probes and accessories.
Variants include the a rack-mount version ('''R7603'''), and the '''AN/USM 281C''', a ruggedized 7603 without readout (was also known as 7603N Option 11S)
that includes two AM-6565 ([[7A15AN11]]) single-trace amplifiers, a TD-1085 ([[7B53AN11]]) dual time base, and a clip-on front panel cover with probes and accessories.


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Bandwidth | 100 MHz with [[7A11]], [[7A16]], [[7A17]]; 110 MHz with [[7A19]], 70 MHz with [[7A18]] }}
{{Spec | Bandwidth | 100 MHz with [[7A11]], [[7A16]], [[7A17]], [[7A24]], [[7A26]]; 110 MHz with [[7A19]], 70 MHz with [[7A18]] }}
{{Spec | Fastest calibrated sweep | 5 ns/Div }}
{{Spec | Fastest calibrated sweep | 5 ns/Div }}
{{Spec | CRT std. | P31 phosphor, 8 &times; 10 divisions of 1.22 cm (Tek [[T7400]]/[[154-0640-00]] tube); 15 kV acceleration (-3/+12); Option 8: P11 phosphor}}
{{Spec | CRT |
{{Spec | CRT Opt. 4 | P31 phosphor, 8 &times; 10 divisions of 1.0 cm  (Tek [[154-0672-00]] tube); 18 kV acceleration}}
* Standard:  P31 phosphor, 8 &times; 10 divisions of 1.22 cm (Tek [[T7400]]/[[154-0640-00]] tube); 15 kV acceleration (-3/+12); Option 8: P11 phosphor
{{Spec | CRT Opt. 6 | P31 phosphor, 8 &times; 10 divisions of 1.22 cm  (Tek [[154-0673-00]] tube, spectrum analyzer graticule)}}
* Opt. 4 P31 phosphor, 8 &times; 10 divisions of 1.0 cm  (Tek [[154-0672-00]] tube); 18 kV acceleration
* Opt. 6 : P31 phosphor, 8 &times; 10 divisions of 1.22 cm  (Tek [[154-0673-00]] tube, spectrum analyzer graticule)
}}
{{Spec | Vertical modes | Left / Alt / Add / Chop / Right }}
{{Spec | Vertical modes | Left / Alt / Add / Chop / Right }}
{{Spec | Trigger Source | Left / Vert Mode / Right }}
{{Spec | Trigger Source | Left / Vert Mode / Right }}
{{Spec | Inputs | Z Axis }}
{{Spec | Inputs | Z Axis }}
{{Spec | Outputs | Camera power, Vert signal, +Gate, +Sawtooth }}
{{Spec | Outputs | Camera power, Vert signal, +Gate, +Sawtooth }}
{{Spec | Line Voltage | 100 / 110 / 120 / 200 / 220 / 240 V, +/- 10%, 50—440 Hz }}
{{Spec | Power | 100 / 110 / 120 / 200 / 220 / 240 V, +/- 10%, 50—440 Hz, max. 170 W  }}
{{Spec | Power | Max. 170 W  }}
{{Spec | Weight | 13.6 kg / 30 lb  (instrument only) }}
{{Spec | Weight | 13.6 kg / 30 lb  (instrument only) }}
{{Spec | Operating Environment | 0°C – +50°C, < 15,000 ft }}
{{Spec | Operating Environment | 0°C – +50°C, < 15,000 ft }}
Line 36: Line 52:
===Options===
===Options===


Due to the long production time of the 7603 many options were available. As some options became standard (e.g. built-in fan) some numbers where assigned twice. Later models were equipped with an IEC socket, making all A''x'' options obsolete.
Due to the long production time of the 7603 many options were available.
As some options became standard (e.g. built-in fan) some numbers were assigned twice.
Later models were equipped with an [[IEC connector|IEC320 mains socket]], making all A''x'' (power cable style) options obsolete.


<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
Line 57: Line 75:


==Internals==
==Internals==
The 7603 was made in various versions for many years, with revisions to some subassemblies like the vertical output amplifier and HV circuits. It uses a linear power supply, a fan is optional. CRT deflection plates are not distributed. The vertical output amplifier is built around a [[155-0080-00]] hybrid.  Other custom Tek ICs used include [[155-0011-00]] clock & chop blanking, [[155-0022-00]] channel switch, and the [[7000 series readout system]] chips.   
The 7603 was made in various versions for many years, with revisions to some subassemblies like the vertical output amplifier and HV circuits. A fan is optional.  
 
The vertical output amplifier is built around a [[155-0080-00]] hybrid (U450)CRT deflection plates are not distributed.
 
Other custom Tek ICs used include [[155-0011-00]] clock & chop blanking (U55), [[155-0022-00]] vertical channel switch (U214),
[[155-0022-00]] trigger channel switch (U324),and the [[7000 series readout system]] chips.   


==Modifications==
==Modifications==
There was an official Tek mod to add pushbutton illumination for plugins, which involves adding a regulator, but there is also a quick'n'dirty method from Rolynn Prechtl:
[[Media:7603mod36005.pdf|Official Modification 36005]] added a ground strap to the vertical amplifier to prevent >1 GHz oscillations.
 
Like the other 76xx models, the 7603 has a linear supply which does not provide [[7000 Series plug-in interface|+5 V for lights (A9)]]. 
There was an [[Media:040-0686-01.pdf|official Tek modification to add pushbutton illumination for plugins]],
which involves adding a regulator, but there is also a quick'n'dirty method from Rolynn Prechtl:


<blockquote>
<blockquote>
Line 66: Line 93:
no pulling the LVPS to find a place to add extra components and the best
no pulling the LVPS to find a place to add extra components and the best
part, no cost.
part, no cost.
<br>
<br />
Look for P90 and P10 on the rear edge of the Main Interface ECB (left side
Look for P90 and P10 on the rear edge of the Main Interface ECB (left side
as I remember).
as I remember).
<br>
<br />
Connect P10-1 (gnd) P90-7 or 8 (gnd).
Connect P10-1 (GND) P90-7 or 8 (GND).
<br>
<br />
Connect P10-2 (+5V) to P90-4 (+5V).
Connect P10-2 (+5 V) to P90-4 (+5 V).
<br>
<br />
Two wires and you're done.
Two wires and you're done.
<br>
<br />
Have experienced no problems with the extra current demand from the +5V
Have experienced no problems with the extra current demand from the +5V
regulated supply.
regulated supply.
Line 99: Line 126:
|align=right|  $4,235
|align=right|  $4,235
|-
|-
! 2015 value
! 2019 value
|align=right|  $8,500
|align=right|  $9,160
|align=right|  $7,470
|align=right|  $8,040
|align=right|  $6,480
|align=right|  $6,970
|align=right|  $6,510
|align=right|  $7,010
|align=right|  $7,650
|align=right|  $8,240
|-
|-
!rowspan=2| Mainframe with 2 × [[7A18]] + [[7B53]]
!rowspan=2| Mainframe with 2 × [[7A18]] + [[7B53]]
Line 114: Line 141:
|align=right| $10,315
|align=right| $10,315
|-
|-
! 2015 value
! 2019 value
|align=right| $18,720
|align=right| $20,150
|align=right| $16,410
|align=right| $17,670
|align=right| $14,970
|align=right| $16,120
|align=right| $15,640
|align=right| $16,830
|align=right| $18,630
|align=right| $20,060
|}
|}


Line 131: Line 158:
* [http://www.jvgavila.com/tek7603.htm EB5AGV's Tektronix R7603 / 7D20 page]
* [http://www.jvgavila.com/tek7603.htm EB5AGV's Tektronix R7603 / 7D20 page]
* [http://www.controlelectronics.com.au/used/refurbished.html Picture of a completely disassembled 7603]
* [http://www.controlelectronics.com.au/used/refurbished.html Picture of a completely disassembled 7603]
* [http://hakanh.com/dl/7603recap.htm Håkan's 7603 PSU re-cap]
* [https://www.youtube.com/watch?v=WPny2YtwCFg Zenwizard Studios -  Tektronix 7603 Lab Check in and Calibration]


==Pictures==
==Pictures==


<gallery>
<gallery>
File:Tek-7603-front.jpg | Tektronix 7603, front view
7603-4trace.jpg        | Tektronix 7603, front view with display
File:Tek-R7603.jpg       | R7603
Tek-7603-front.jpg     | Tektronix 7603, front view
File:Tek-7603-left.jpg   | 7603, left side - center left: vertical amplifier
Tek 7603 opt8.jpg      | 7603 Option 8 (blue P11 phosphor)
File:Tek-7603-right.jpg | 7603, right side - left: calibrator, center left: readout, center right: cover of HV board
Tek-R7603.jpg         | R7603
File:Tek-7603-top.jpg   | 7603, top view - top: Z axis board, bottom: horizontal amplifier board
Tek 7603 f.jpg
File:Tek-7603-bp.jpg     | Interior view of rear panel showing part of LV regulator board
Late 7603 with digital readout.jpg | Late model [[7603]] with [[7000 series readout system#Microcontroller-based Readout Board|microprocessor-based readout]]
File:Tek-7603-back-open.jpg | Rear view with LV regulator board flipped out
</gallery>
File:Tek-7603-lvreg.jpg | low voltage regulator board
 
File:Tek-7603-bottom.jpg | Bottom view of backplane.  Backplane interconnect board is seen in center, vertical interface and trigger selector piggyback boards on left/top left, logic board on right.
===Internal===
File:Tek-7603-logic-board.jpg | Logic board (normally situated on back of main interconnect facing the PSU)
<gallery>
File:Tek-7603-vertif-trigselect.jpg | Trig Select and Vertical Interface boards
Tek-7603-left.jpg             | 7603, left side - center left: vertical amplifier
File:Tek-7603-interconnect.jpg | Backplane interconnect without Vertical Interface and Trigger Selector piggyback boards
Tek-7603-right.jpg             | 7603, right side - left: calibrator, center left: readout, center right: cover of HV board
File:Tek 7603 opt8.jpg | 7603 Option 8 (blue P11 phosphor)
Tek-7603-top.jpg               | 7603, top view - top: Z axis board, bottom: horizontal amplifier board
7603-hv-board.jpg              | HV board (below SN B330000)
Tek_7603_HV_new.jpg            | HV board (later version, DC restorer circuits on daughter boards, neons)
Tek-7603-bp.jpg               | Interior view of rear panel showing part of LV regulator board (version without fan)
Tek-7603-back-open.jpg         | Rear view with LV regulator board flipped out (version without fan)
Tek-7603-lvreg.jpg             | Low voltage regulator board
Tek_7603_lvreg_maint.jpg      | Low voltage regulator board fixed for maintenance
Tek-7603-bottom.jpg           | Bottom view of backplane.  Backplane interconnect board is seen in center, vertical interface and trigger selector piggyback boards on left/top left, logic board on right.
Tek-7603-logic-board.jpg       | Logic board (normally situated on back of main interconnect facing the PSU)
Tek-7603-vertif-trigselect.jpg | Trig Select and Vertical Interface boards
Tek-7603-interconnect.jpg     | Backplane interconnect without Vertical Interface and Trigger Selector piggyback boards
</gallery>
 
===Modifications===
<gallery>
7603_lamp_supply_1.jpg | Pushbutton illumination supply using a small step-down regulator module
7603_lamp_supply_2.jpg
7603_lamp_supply_3.jpg
</gallery>
</gallery>
{{CRTs|7603}}
{{Custom ICs|7603}}
{{Custom ICs|7000 series readout system}}


[[Category:7000 series non-storage mainframes]]
[[Category:7000 series non-storage mainframes]]

Revision as of 00:46, 14 October 2022

Manuals – Specifications – Links – Pictures

The Tektronix 7603 is a general-purpose 100 MHz non-storage, large-screen scope that takes two 7000-series vertical plug-ins and one 7000-series horizontal plug-in.

Variants include the a rack-mount version (R7603), and the AN/USM 281C, a ruggedized 7603 without readout (was also known as 7603N Option 11S) that includes two AM-6565 (7A15AN11) single-trace amplifiers, a TD-1085 (7B53AN11) dual time base, and a clip-on front panel cover with probes and accessories.

Key Specifications

Bandwidth 100 MHz with 7A11, 7A16, 7A17, 7A24, 7A26; 110 MHz with 7A19, 70 MHz with 7A18
Fastest calibrated sweep 5 ns/Div
CRT
  • Standard: P31 phosphor, 8 × 10 divisions of 1.22 cm (Tek T7400/154-0640-00 tube); 15 kV acceleration (-3/+12); Option 8: P11 phosphor
  • Opt. 4 : P31 phosphor, 8 × 10 divisions of 1.0 cm (Tek 154-0672-00 tube); 18 kV acceleration
  • Opt. 6 : P31 phosphor, 8 × 10 divisions of 1.22 cm (Tek 154-0673-00 tube, spectrum analyzer graticule)
Vertical modes Left / Alt / Add / Chop / Right
Trigger Source Left / Vert Mode / Right
Inputs Z Axis
Outputs Camera power, Vert signal, +Gate, +Sawtooth
Power 100 / 110 / 120 / 200 / 220 / 240 V, +/- 10%, 50—440 Hz, max. 170 W
Weight 13.6 kg / 30 lb (instrument only)
Operating Environment 0°C – +50°C, < 15,000 ft

Options

Due to the long production time of the 7603 many options were available. As some options became standard (e.g. built-in fan) some numbers were assigned twice. Later models were equipped with an IEC320 mains socket, making all Ax (power cable style) options obsolete.

  • Opt.1: Without readout (= 7603N)
  • Opt.3: Extra EMI shielding
  • Opt.4/Opt.13: Maximum-brightness CRT with reduced area (8x10 cm graticule)
  • Opt.5: Fan
  • Opt.5 (later models): 400 Hz line frequency
  • Opt.6: Spectrum analyzer graticule
  • Opt.7: Without Signals Out
  • Opt.8: P11 phosphor
  • Opt.8 (later models): protective front panel cover, 7603 only
  • Opt.11S: Ruggedized variant AN/USM 281C, specified at 50 MHz
  • Opt.20: Rear GPIB socket for 7D20, removes +Sawtooth, +Gate, vertical signal outputs, R7603 only
  • Opt.76: P7 phosphor
  • Opt.77: P7 phosphor with spectrum analyzer graticule
  • Opt.78: P11 phosphor

Internals

The 7603 was made in various versions for many years, with revisions to some subassemblies like the vertical output amplifier and HV circuits. A fan is optional.

The vertical output amplifier is built around a 155-0080-00 hybrid (U450). CRT deflection plates are not distributed.

Other custom Tek ICs used include 155-0011-00 clock & chop blanking (U55), 155-0022-00 vertical channel switch (U214), 155-0022-00 trigger channel switch (U324),and the 7000 series readout system chips.

Modifications

Official Modification 36005 added a ground strap to the vertical amplifier to prevent >1 GHz oscillations.

Like the other 76xx models, the 7603 has a linear supply which does not provide +5 V for lights (A9). There was an official Tek modification to add pushbutton illumination for plugins, which involves adding a regulator, but there is also a quick'n'dirty method from Rolynn Prechtl:

I've done multiple units the cheap and dirty way. No additional regulator, no pulling the LVPS to find a place to add extra components and the best part, no cost.
Look for P90 and P10 on the rear edge of the Main Interface ECB (left side as I remember).
Connect P10-1 (GND) P90-7 or 8 (GND).
Connect P10-2 (+5 V) to P90-4 (+5 V).
Two wires and you're done.
Have experienced no problems with the extra current demand from the +5V regulated supply.

Prices

  Year 1973 1976 1980 1984 1990
Mainframe only Catalog price $1,600 $1,800 $2,260 $2,865 $4,235
2019 value $9,160 $8,040 $6,970 $7,010 $8,240
Mainframe with 2 × 7A18 + 7B53 Catalog price $3,520 $3,955 $5,225 $6,880 $10,315
2019 value $20,150 $17,670 $16,120 $16,830 $20,060

Links

Pictures

Internal

Modifications


CRTs used in the 7603

Page Part nos Description Designers Used in
T7400 154-0640-00 154-0640-05 154-0640-31 154-0640-10 154-0672-00 154-0673-00 large-screen CRT (8 × 10 divisions of 1.22 cm) 7403N 7603 Telequipment D83

Custom ICs used in the 7603

Page Model Part nos Description Designers Used in
155-0011-00 M012 155-0011-00 clock and chop blanking Les Larson 485 7313 7403N R7403N 7503 7504 7514 7603 AN/USM-281C 7613 7623 7623A 7633 7704 R7704 7704A 7834 7844 7854 7904 7904A R7903 R7912 7912AD 7912HB 7934 7104 R7103 AN/USM-281C
155-0022-00 M036 155-0022-00 155-0022-01 analog multiplexer Gene Andrews 147 148 149 335 468 1430 1441 1461 1900 1910 2220 2221 2230 5223 5403 5440 5441 5443 5444 5A38 7313 7403N 7503 7504 7514 7603 AN/USM-281C 7613 7623 7623A 7633 7704 R7704 7704A 7834 7844 7854 R7912 7912AD 7912HB 7904 R7903 7904A 7934 7A12 7A18 7A18A 7A18N 7B52 7B53N 7D10 7D11 7D12 NT-7000 P7001
155-0080-00 M125 155-0080-00 vertical output amplifier 7603 R7603 7613 R7613 7623 AN/USM-281C

Custom ICs used in the 7000 series readout system

Page Model Part nos Description Designers Used in
155-0014-01 M019D 155-0014-00 155-0014-01 A/D converter Barrie Gilbert 7000 series readout system 7854 7934 7J20 7L5 P7001
155-0015-01 M020F 155-0015-00 155-0015-01 analog data switch Barrie Gilbert 7000 series readout system 7854 7934
155-0017-00 M025 155-0017-00 5 MHz decade counter Barrie Gilbert 7000 series readout system 7854 7934
155-0018-00 M026 155-0018-00 zeros logic control Les Larson 7000 series readout system 7934
155-0019-00 M027 155-0019-00 decimal point and spacing control Les Larson 7000 series readout system
155-0020-00 M028 155-0020-00 output assembler Les Larson 7000 series readout system
155-0021-00 M029C 155-0021-00 155-0021-01 timing generator Les Larson 7000 series readout system 7854 7934
155-0023-00 M160 155-0023-00 character generator (0 1 2 3 4 5 6 7 8 9) Barrie Gilbert 7000 series readout system
155-0024-00 M161 155-0024-00 character generator (↓ < I / + - + C Δ >) Barrie Gilbert 7000 series readout system
155-0025-00 M162 155-0025-00 character generator (m μ n p X K M G T R) Barrie Gilbert 7000 series readout system
155-0026-00 M163 155-0026-00 character generator (S V A W H d B c Ω E) Barrie Gilbert 7000 series readout system
155-0027-00 M164 155-0027-00 character generator (U N L Z Y P F J Q D) Barrie Gilbert 7000 series readout system