7M11: Difference between revisions
No edit summary |
No edit summary |
||
(8 intermediate revisions by 3 users not shown) | |||
Line 4: | Line 4: | ||
image=Tek-7m11-front.jpg | | image=Tek-7m11-front.jpg | | ||
caption=7M11 front panel | | caption=7M11 front panel | | ||
introduced= | introduced=1969 | | ||
discontinued=1988 | | discontinued=1988 | | ||
series=[[7000-series scopes]]| | series=[[7000-series scopes]]| | ||
manuals= | manuals= | ||
* [[Media: | * [[Media:070-0987-00.pdf|7M11 Manual]] (OCR PDF, 2.5MB) | ||
}} | }} | ||
The Tektronix 7M11 is a plug-in which contains two independent 50 Ω analog delay lines | The '''Tektronix 7M11''' is a plug-in which contains two independent 50 Ω, 75 ns analog delay lines. | ||
Rise time is specified as 175 ps maximum, and attenuation is fixed at 2:1. | Rise time is specified as 175 ps maximum, and attenuation is fixed at 2:1. | ||
Delay line connections are 50 Ω [[GR-874]]. | |||
To eliminate an external power splitter, a separate trigger output is available through a [[BNC connector]] | |||
at 5:1 attenuation (line 1 or 2 switch selectable). | at 5:1 attenuation (line 1 or 2 switch selectable). | ||
The maximum signal allowed is | The maximum signal allowed is ±5 V. | ||
The mass of the 7M11 about 2.5 kg (5.5 lb), so one must be careful when sliding it into the slot. | The mass of the 7M11 about 2.5 kg (5.5 lb), so one must be careful when sliding it into the slot. | ||
(Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!) | (Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!) | ||
Because it is completely passive and has no bus contacts, | Because it is completely passive and has no bus contacts, the 7M11 can be | ||
operated outside of the mainframe on the desk, freeing a slot for another plug-in. | |||
freeing a slot for another plug-in. | Tek originally made a carrying enclosure (437-0106-00) to hold a 7M11 for desk use. | ||
Tek originally made a carrying enclosure to hold a 7M11 for desk use. | |||
The interface between the GR-874 input connector and the trigger pickoff board is described in US Patent 3,426,311. | The interface between the GR-874 input connector and the trigger pickoff board is described in [https://www.google.com/patents/US3426311 US Patent 3,426,311], and is similar to the ones in the [[S-1]] and [[S-2]] samplers. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Delay | 75 ns (each channel) }} | {{Spec | Delay | 75 ns (each channel) }} | ||
{{Spec | Delay difference | max. ±30 ps between channels}} | |||
{{Spec | Rise time | 185 ps }} | {{Spec | Rise time | 185 ps }} | ||
{{Spec | Attenuation | 2:1 (6 dB) | {{Spec | Attenuation | 2:1 (6 dB) on main outputs, 5:1 (14 dB) on trigger pick-off }} | ||
{{Spec | Input voltage | | {{Spec | Input voltage | ±5 V, max. }} | ||
{{Spec | Weight | 2.6 kg (!) }} | {{Spec | Weight | 2.6 kg (!) }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Line 48: | Line 48: | ||
<gallery> | <gallery> | ||
Tek-7m11-front.jpg | Front | |||
Tek-7m11-right.jpg | Right side | |||
Tek-7m11-fr.jpg | front components detail, right side | |||
Tek-7m11-fl.jpg | front components detail, left side | |||
7M11.jpg | In this specimen, the GR874 connectors were replaced by BNC connectors of adequate quality | |||
7m11-circuit.png | 7M11 circuit diagram | |||
7M11_schem_corr.jpg | Correction R33 value | |||
</gallery> | </gallery> | ||
Line 59: | Line 60: | ||
[[Category:7000 series special-function plugins]] | [[Category:7000 series special-function plugins]] | ||
[[Category:Delay lines]] | [[Category:Delay lines]] | ||
[[Category:GR874]] |
Revision as of 15:36, 25 May 2021
The Tektronix 7M11 is a plug-in which contains two independent 50 Ω, 75 ns analog delay lines. Rise time is specified as 175 ps maximum, and attenuation is fixed at 2:1.
Delay line connections are 50 Ω GR-874.
To eliminate an external power splitter, a separate trigger output is available through a BNC connector at 5:1 attenuation (line 1 or 2 switch selectable).
The maximum signal allowed is ±5 V. The mass of the 7M11 about 2.5 kg (5.5 lb), so one must be careful when sliding it into the slot. (Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!)
Because it is completely passive and has no bus contacts, the 7M11 can be operated outside of the mainframe on the desk, freeing a slot for another plug-in. Tek originally made a carrying enclosure (437-0106-00) to hold a 7M11 for desk use.
The interface between the GR-874 input connector and the trigger pickoff board is described in US Patent 3,426,311, and is similar to the ones in the S-1 and S-2 samplers.
Key Specifications
Delay | 75 ns (each channel) |
---|---|
Delay difference | max. ±30 ps between channels |
Rise time | 185 ps |
Attenuation | 2:1 (6 dB) on main outputs, 5:1 (14 dB) on trigger pick-off |
Input voltage | ±5 V, max. |
Weight | 2.6 kg (!) |
Links
- Tekscope Vol. 2 No. 1, Feb 1970
- Tek 7M11 @ amplifier.cd
- Tek 7M11 @ barrytech.com
- Tek 7M11 @ analogdesign.be
Pictures
-
Front
-
Right side
-
front components detail, right side
-
front components detail, left side
-
In this specimen, the GR874 connectors were replaced by BNC connectors of adequate quality
-
7M11 circuit diagram
-
Correction R33 value