Difference between revisions of "7M11"

From TekWiki
Jump to navigation Jump to search
Line 3: Line 3:
 
Max. signal allowed is +-5V.
 
Max. signal allowed is +-5V.
  
Because its completey passive and has no bus connector, it can be operated outside of the mainframe on the desk, giving free an additional slot for another plugin.
+
Because its completely passive and has no bus connector, it can be operated outside of the mainframe on the desk, giving free an additional slot for another plugin.
 +
 
 +
[[Image:7M11.jpg|200px|thumb|left|Connectors were changed to BNC with adequately quality]]

Revision as of 13:35, 6 April 2010

7M11 is a plugin which contain two independent 50 Ohms analog delay lines with 75nS each. Risetime is specified as max. 175pS and attenuation is fixed at two. A separate trigger output is available to eliminate an external power splitter and it is attenuated by a factor of five. Unfortunately there are four GR-874 50-ohm connector and adapters are hard to find in the mean time.

Max. signal allowed is +-5V.

Because its completely passive and has no bus connector, it can be operated outside of the mainframe on the desk, giving free an additional slot for another plugin.

Connectors were changed to BNC with adequately quality