7M11: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Plugin Sidebar| | |||
title=Tektronix 7M11| | |||
summary=Dual Delay Line| | |||
image=Tek 7m11 front.jpg| | |||
caption=7M11 front panel| | |||
years=? – ?| | |||
type=Special Purpose| | |||
series=[[7000-series scopes]]| | |||
manuals= | |||
}} | |||
The Tektronix 7M11 is a plug-in which contains two independent 50 Ohm analog delay lines with 75 ns each. | The Tektronix 7M11 is a plug-in which contains two independent 50 Ohm analog delay lines with 75 ns each. | ||
Risetime is specified as 175 ps maximum, and attenuation is fixed at two. | Risetime is specified as 175 ps maximum, and attenuation is fixed at two. | ||
A separate trigger output is available to eliminate an external power splitter | |||
A separate trigger output is available to eliminate an external power splitter. Signal through the trigger pick-off output is attenuated by a factor of five. Delay line connections are 50-ohm [[Connectors#GR-874|GR-874]], trigger pickoff is through a BNC connector. | |||
The maximum signal allowed is +/- 5V. | The maximum signal allowed is +/- 5V. | ||
The mass of the 7M11 about 2. | The mass of the 7M11 about 2.5 kg, so be careful when sliding it into the slot. | ||
so be careful when sliding it into the slot. | (Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!) | ||
Generally Tektronix specifies not to ship mainframes with | |||
inserted plug-ins, to protect the bus connectors! | Because it is completely passive and has no bus contacts, the 7M11 can be operated outside of the mainframe on the desk, freeing a slot for another plug-in. | ||
==Specifications== | |||
==Links== | |||
==Pictures== | |||
<gallery> | <gallery> | ||
| Line 23: | Line 39: | ||
[[Category:7000 series special-function plugins]] | [[Category:7000 series special-function plugins]] | ||
[[Category:Specifications needed]] | [[Category:Specifications needed]] | ||
[[Category:Manual needed]] | |||
Revision as of 09:35, 8 May 2014
The Tektronix 7M11 is a plug-in which contains two independent 50 Ohm analog delay lines with 75 ns each.
Risetime is specified as 175 ps maximum, and attenuation is fixed at two.
A separate trigger output is available to eliminate an external power splitter. Signal through the trigger pick-off output is attenuated by a factor of five. Delay line connections are 50-ohm GR-874, trigger pickoff is through a BNC connector.
The maximum signal allowed is +/- 5V. The mass of the 7M11 about 2.5 kg, so be careful when sliding it into the slot. (Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!)
Because it is completely passive and has no bus contacts, the 7M11 can be operated outside of the mainframe on the desk, freeing a slot for another plug-in.
Specifications
Links
Pictures
-
Connectors were changed to BNC of adequate quality
-
-
