82: Difference between revisions
No edit summary |
No edit summary |
||
Line 10: | Line 10: | ||
a low controlled impedance (93 ohms), as opposed to other 500-series scopes | a low controlled impedance (93 ohms), as opposed to other 500-series scopes | ||
that present a high impedance to the plug-in. | that present a high impedance to the plug-in. | ||
* [http://w140.com/tek-82.pdf Tektronix Type 82 Manual (PDF)] | |||
<gallery> | <gallery> |
Revision as of 17:51, 6 March 2011
The Tektronix Type 82 is a dual-trace plug-in for the 580-series scopes. The Type 82 combined with a 585 or 585A provides a 4 nanosecond risetime. The front end of the Type 82 is a 7586 nuvistor cathode-follower, followed by bipolar diff-amps and diode channel switching, followed by a distributed output amplifier made of three 6DJ8 tubes, with differential 93-ohm outputs. The use of a distributed amplifier in a plug-in is unusual. Note that the 58x series differs from 500-series scopes mainly in that the vertical signal interface between the plug-in and the mainframe is a low controlled impedance (93 ohms), as opposed to other 500-series scopes that present a high impedance to the plug-in.
-
Front view, early style.
-
Left view.
-
Top view.
-
Right view.
-
-
-
-
Front view, later style.
-
-
Bottom of distributed amplifier.
-
Top of distributed amplifier.