84: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:
for adjusting the impulse response of the vertical amplifiers in the scope,
for adjusting the impulse response of the vertical amplifiers in the scope,
and load resistors to test the power supply of the scope.  The fast-rise
and load resistors to test the power supply of the scope.  The fast-rise
pulses are produced by a [[mercury switch]] with part number [[260-0282-02]]  
pulses are produced by a [[mercury switch]]
and are specified to have a repetition rate of 550 to 750 pulses per
and are specified to have a repetition rate of 550 to 750 pulses per
second, with a rise time that is "considerably less than the response time
second, with a rise time that is "considerably less than the response time

Revision as of 11:10, 30 December 2011

The Tektronix Type 84 is a calibration fixture plug-in for 580-series scopes. It was renamed the 067-0523-00 during production. The Type 84 provides a calibrated amplitude signal for adjusting gain, a fast-rise voltage step for adjusting the impulse response of the vertical amplifiers in the scope, and load resistors to test the power supply of the scope. The fast-rise pulses are produced by a mercury switch and are specified to have a repetition rate of 550 to 750 pulses per second, with a rise time that is "considerably less than the response time of the vertical amplifier in a 580-series oscilloscope."