AM501: Difference between revisions

From TekWiki
Jump to navigation Jump to search
m (blockquote)
No edit summary
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{TM500 | mfg=Tektronix | type=AM501 | function=5 MHz operational amplifier | class=amplifier | image=Tek am501 front.JPG | introduced=1974 | discontinued=(?) | designers= |manuals=
{{TM500 | mfg=Tektronix | type=AM501 | function=5 MHz operational amplifier | class=amplifier | image=Tek am501 front.JPG | introduced=1974 | discontinued=(?) | designers= |manuals=
* [[Media:AM501.pdf|AM501 Manual]] (PDF, 15MB)
* [[Media:070-1616-01.pdf|AM501 Manual]] (PDF, 15MB)
}}
}}
Also available was the accessory "AM501 Auxiliary Circuit Board Kit', Part number: 013-0146-00, described as
Also available was the accessory ''AM501 Auxiliary Circuit Board Kit'', Part number: [[013-0146-00]], described as
<blockquote>
<blockquote>
The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br>
The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.<br>
An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501.
An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501.
</blockquote>
</blockquote>
{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Open Loop Gain | >10000 into an 800 Ω load}}
{{Spec | Unity-gain bandwidth | >5 MHz into an 800 Ω load}}
{{Spec | Common Mode Rejection Ratio | >10000:1 at 60 Hz}}
{{Spec | Open-loop gain | >10000 into an 800 Ω load}}
{{Spec | Unity Gain Bandwidth | >5 MHz into an 800 Ω load}}
{{Spec | CMRR | >10000:1 at 60 Hz}}
{{Spec | Common Mode Input Voltage Range |±40 V }}
{{Spec | Common-mode input range | ±40 V }}
{{Spec | Maximum Safe Differential Input Volatage | 80 V }}
{{Spec | Maximum input | 80 V max. safe differential }}
{{Spec | Slew Rate |> 50 V/μs into an 800 Ω load}}
{{Spec | Slew Rate | >50 V/μs into an 800 Ω load}}
{{Spec | Output Voltage Range | > ±40 V}}
{{Spec | Output voltage | > ±40 V}}
{{Spec | Output Current | > ±50 mA }}
{{Spec | Output current | > ±50 mA }}
{{EndSpecs}}
{{EndSpecs}}



Revision as of 13:26, 27 May 2022

Tektronix AM501
5 MHz operational amplifier
Tektronix AM501

Produced from 1974 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix AM501 is a 5 MHz operational amplifier plug-in for the TM500 system.

Also available was the accessory AM501 Auxiliary Circuit Board Kit, Part number: 013-0146-00, described as

The AM501 Auxiliary Circuit Board Kit attaches to the input and output terminals on the front of the AM501 Amplifier. The kit is a PC board has six terminal studs for attachment to the amplifier's banana jacks and is approximately 2.5-inches square. This permits the designer to build a circuit of resistors, capacitors, and other components for use in conjunction with the AM 501's input, output, or feedback circuits. With several boards, the AM 501 Op Amp circuit can be changed instantly in configuration from integrator to differentiator to amplifier.
An additional advantage of the kit is that it does not interfere with the other connectors on the face of the AM501.

Key Specifications

Unity-gain bandwidth >5 MHz into an 800 Ω load
Open-loop gain >10000 into an 800 Ω load
CMRR >10000:1 at 60 Hz
Common-mode input range ±40 V
Maximum input 80 V max. safe differential
Slew Rate >50 V/μs into an 800 Ω load
Output voltage > ±40 V
Output current > ±50 mA

Links

Pictures