AWG2005: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Frequency | 0.01 Hz to 20 MHz, 4 | {{Spec | Frequency | Point clock 0.01 Hz to 20 MHz, 4 digit resolution (Opt.05: 7 digits) }} | ||
{{Spec | Channels | 2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel }} | {{Spec | Channels | 2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel; low pass filters 0.5/1/2/5 MHz }} | ||
{{Spec | Functions | Sine, triangle, Square, Ramp, Pulse and Arbitrary }} | {{Spec | Functions | Sine, triangle, Square, Ramp, Pulse and Arbitrary; min. 16 points }} | ||
{{Spec | Output | Range: 50 mV<sub>p-p</sub>to 10 V<sub>p-p</sub> (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source }} | {{Spec | Output | Range: 50 mV<sub>p-p</sub>to 10 V<sub>p-p</sub> (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source }} | ||
{{Spec | Memory | 64K x 12 bits waveform, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb }} | {{Spec | Memory | 64K x 12 bits waveform per channel, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb }} | ||
{{Spec | Storage | 512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive }} | {{Spec | Storage | 512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive }} | ||
{{Spec | Sweep | Linear, Log, Arbitrary; Continuous, Triggered, Gated modes }} | {{Spec | Sweep | Linear, Log, Arbitrary; Continuous, Triggered, Gated modes }} | ||
| Line 13: | Line 13: | ||
{{Spec | Weight | 10.7 kg (23.5 lb) }} | {{Spec | Weight | 10.7 kg (23.5 lb) }} | ||
{{Spec | Display | Monochrome CRT, 640×480px., 132 mm × 99 mm display area }} | {{Spec | Display | Monochrome CRT, 640×480px., 132 mm × 99 mm display area }} | ||
{{Spec | Power | | {{Spec | Power | 100−250 V<sub>AC</sub>, ≤300 W; fan cooled }} | ||
{{Spec | Options | | |||
* Opt. 02 − two additional output channels | |||
* Opt. 04 − TTL level 12-bit data plus clock output (rear panel) | |||
* Opt. 05 − Edit clock sweep | |||
* Opt. 09 − Edit in frequency domain (floating point processor) | |||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 04:03, 2 September 2020
The Tektronix AWG2005 is an arbitrary waveform generator.
Key Specifications
{{Spec | Options |- Opt. 02 − two additional output channels
- Opt. 04 − TTL level 12-bit data plus clock output (rear panel)
- Opt. 05 − Edit clock sweep
- Opt. 09 − Edit in frequency domain (floating point processor)
| Frequency | Point clock 0.01 Hz to 20 MHz, 4 digit resolution (Opt.05: 7 digits) |
|---|---|
| Channels | 2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel; low pass filters 0.5/1/2/5 MHz |
| Functions | Sine, triangle, Square, Ramp, Pulse and Arbitrary; min. 16 points |
| Output | Range: 50 mVp-pto 10 Vp-p (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source |
| Memory | 64K x 12 bits waveform per channel, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb |
| Storage | 512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive |
| Sweep | Linear, Log, Arbitrary; Continuous, Triggered, Gated modes |
| Interfaces | GPIB, RS-232; direct transfers from TDS Series, 2200/2400 series, 11000 Series, AFG2020 or AWG20XX series |
| Size | 160 mm × 360 mm × 490 mm (H/W/L) |
| Weight | 10.7 kg (23.5 lb) |
| Display | Monochrome CRT, 640×480px., 132 mm × 99 mm display area |
| Power | 100−250 VAC, ≤300 W; fan cooled |
