AWG2005: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
The '''Tektronix AWG2005''' is an arbitrary waveform generator [[introduced in 1995]].
{{Instrument Sidebar
|manufacturer=Sony/Tektronix
|model=AWG2005
|class=Signal generator
|summary=20 MS/s Arbitrary Waveform Generator
|image=Tek awg2005 10.jpg
|caption=Sony/Tektronix AWG2005
|introduced=1995
|discontinued=(?)
|designers=
|manuals=
* [http://w140.com/tek_awg2005.pdf Tektronix AWG2005 Manual (PDF)]
}}
The '''Sony/Tektronix AWG2005''' is a 20 MS/s, 12-bit arbitrary waveform generator [[introduced in 1995]].


{{BeginSpecs}}
{{BeginSpecs}}
Line 20: Line 33:
}}
}}
{{EndSpecs}}
{{EndSpecs}}
==Manuals==
* [http://w140.com/tek_awg2005.pdf Tektronix AWG2005 Manual (PDF)]


==Pictures==
==Pictures==
Line 39: Line 49:


[[Category:Arbitrary waveform generators]]
[[Category:Arbitrary waveform generators]]
[[Category:Introduced in 1995]]

Revision as of 01:42, 23 August 2021

Sony/Tektronix AWG2005
20 MS/s Arbitrary Waveform Generator
Sony/Tektronix AWG2005

Produced from 1995 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Sony/Tektronix AWG2005 is a 20 MS/s, 12-bit arbitrary waveform generator introduced in 1995.

Key Specifications

Frequency Point clock 0.01 Hz to 20 MHz, 4 digit resolution (Opt.05: 7 digits)
Channels 2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel; low pass filters 0.5/1/2/5 MHz
Functions Sine, triangle, Square, Ramp, Pulse and Arbitrary; min. 16 points
Output Range: 50 mVp-pto 10 Vp-p (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source
Memory 64K x 12 bits waveform per channel, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb
Storage 512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive
Sweep Linear, Log, Arbitrary; Continuous, Triggered, Gated modes
Interfaces GPIB, RS-232; direct transfers from TDS Series, 2200/2400 series, 11000 Series, AFG2020 or AWG20XX series
Display Monochrome CRT, 640×480px., 132 mm × 99 mm display area
Power 100−250 VAC, ≤300 W; fan cooled
Dimensions 160 mm × 360 mm × 490 mm (H/W/L); 10.7 kg (23.5 lb)
Options
  • Opt. 02 − two additional output channels
  • Opt. 04 − TTL level 12-bit data plus clock output (rear panel)
  • Opt. 05 − Edit clock sweep
  • Opt. 09 − Edit in frequency domain (floating point processor)

Pictures