Back-lit switches: Difference between revisions

From TekWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 1: Line 1:
[[File:Tek-pushbutton-light-on.jpg|400px|thumb|right| ON state]]
[[File:Tek-pushbutton-light-on.jpg|400px|thumb|right| Switch ON state]]
[[File:Tek-pushbutton-light-off.jpg|400px|thumb|right| OFF state]]
[[File:Tek-pushbutton-light-off.jpg|400px|thumb|right| Switch OFF state]]
Tek introduced '''back-lit pushbutton switches''' at the end of the 1960s in the 7000 scope family.
Tek introduced '''back-lit pushbutton switches''' at the end of the 1960s in the 7000 scope family.


There is one [[150-0048-01|miniature 5 V incandescent lamp]] per interlocking group of buttons, with clear plastic light guides reflecting the light to the backs of the transparent plastic buttons.  In the Off state, a small metal flap covers the un-lit button end, in the On state it is pushed open.
There is one [[150-0048-01|miniature 5 V incandescent lamp]] per interlocking group of buttons, with clear plastic light guides reflecting the light to the backs of the transparent plastic buttons.  The lamp is powered all the time.  In the Off state of the switch, a small metal flap covers the un-lit button end, whereas in the On state, this flap is pushed open.


The lamps are not supplied from the standard +5 V (logic supply) rail but from a separate lamp supply rail which is not present in all mainframes (e.g. missing from 7xx3 series scopes - see [[Media:040-0686-01.pdf | modification 040-0686-01 adding this supply]]).  In mainframes that do supply the lamps, the lamp voltage (and therefore lamp intensity) can often be varied, e.g. through a 3-way (off/mid/high) switch in the back of the instrument.  In the [[7904]] (non-A), this is a front panel control.
The lamps are not supplied from the standard +5 V (logic supply) rail but from a separate lamp supply rail which is not present in all mainframes (e.g. missing from 7xx3 series scopes; see [[Media:040-0686-01.pdf | modification 040-0686-01 adding this supply]]).   
 
In mainframes that do supply the lamps, the lamp voltage (and therefore lamp intensity) can often be varied, e.g. through a 3-way (off/mid/high) switch in the back of the instrument.  In some early 7000-series scopes like the [[7503]], [[7504]], or [[7904]] (non-A), this is a front panel control.





Revision as of 06:45, 6 February 2022

Switch ON state
Switch OFF state

Tek introduced back-lit pushbutton switches at the end of the 1960s in the 7000 scope family.

There is one miniature 5 V incandescent lamp per interlocking group of buttons, with clear plastic light guides reflecting the light to the backs of the transparent plastic buttons. The lamp is powered all the time. In the Off state of the switch, a small metal flap covers the un-lit button end, whereas in the On state, this flap is pushed open.

The lamps are not supplied from the standard +5 V (logic supply) rail but from a separate lamp supply rail which is not present in all mainframes (e.g. missing from 7xx3 series scopes; see modification 040-0686-01 adding this supply).

In mainframes that do supply the lamps, the lamp voltage (and therefore lamp intensity) can often be varied, e.g. through a 3-way (off/mid/high) switch in the back of the instrument. In some early 7000-series scopes like the 7503, 7504, or 7904 (non-A), this is a front panel control.