C1001

From TekWiki
Revision as of 04:20, 20 December 2019 by Peter (talk | contribs)
Jump to navigation Jump to search

The Tektronix C1001 is an analog video camera designed to be used with a video frame grabber card in an IBM-compatible PC and Tek waveform processing software.

The camera part was made by NEC and puts out an NTSC signal. It was later superseded by the compatible C1002.

Parts

Connectors

According to this posting, The camera has a 9-pin D-sub connector that takes in 12 V, around 300 mA at pins 1 (positive) and 3 (ground) and signal is on pins 4 (shield/ground) and 5 (video); there are two other pins used which bring in calibration voltages and go only to BNC and two test points.

Links

Pictures