D: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
* [http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf Cal procedure]
* [http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf Cal procedure]
* [http://bama.edebris.com/manuals/tek/d/ Type D manual @ BAMA]
* [http://bama.edebris.com/manuals/tek/d/ Type D manual @ BAMA]
* [[Media:tek_type_d_fcp-00.pdf|Cal procedure (PDF, OCR)]]
}}
}}



Revision as of 10:08, 11 September 2018

Template:Plugin Sidebar 2

The Tektronix Type D is a differential amplifier plug-in for 500-series scopes.

It has high gain, and the bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div and up, to 300 kHz at 1 mV/div.

It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.

Type D was introduced with the 531 and 535 in 1954 as Type 53D. It was briefly renamed Type 53D/54D in 1955 with the introduction of the 541 and 545, and then quickly renamed Type 53/54D. Its name was then shortened to Type D in 1959 with the introduction of the 5xxA scopes. Its last year was 1968, having been superseded by the constant-bandwidth model 1A6.

K, L, and T are tied for longest production life, at 16 years. B, D, and G are next at 15 years.

Lavoie Laboratories produced an unauthorized clone, the Lavoie LA-265-D.

Internals

Some production runs used a pair of 5814 tubes at the input while others used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.

Specifications

please add

Pictures