D: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (Early production not "some production")
(35 intermediate revisions by 6 users not shown)
Line 1: Line 1:
The Tektronix Type D is a plug-in for [[500-series scopes]].
{{Plugin Sidebar 2 |
title=Tektronix D|
summary=Differential amplifier|
image=Tek type d front.jpg |
caption=D front view|
introduced=1954 |
discontinued=1969 |
series=[[500-series scopes]]|
manuals=
* [http://w140.com/mmm/tek-d.pdf Tektronix Type D Manual (PDF)]
<!-- * [http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf Cal procedure] -->
* [http://bama.edebris.com/manuals/tek/d/ Type D manual @ BAMA]
* [[Media:070-228.pdf|Tektronix Type D Manual (PDF, OCR, bad-OCR)]]
* [[Media:tek_type_d_fcp.pdf|Tektronix Type D Factory Calibration Procedure (PDF, OCR)]]
}}


* http://bama.edebris.com/manuals/tek/d/
The '''Tektronix Type D''' is a differential amplifier plug-in for [[500-series scopes]].
* http://w140.com/tek_fcp/tek_type_d_factory_cal_proc.pdf
 
Type D was the most sensitive plug-in of the original four.
The bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div to 300 kHz at 1 mV/div.
There are two axes of sensitivity setting: a decade attenuator in front of a gain switch.
This scheme would be reprised in Type [[W]].
 
It displays the difference between two input signals, with a common-mode rejection ratio of 10,000.  It has
six tubes, on a shock-mounted subchassis to avoid microphonics.
 
Along with Types [[A]], [[B]], and [[C]], Type D was introduced with the [[531]] and [[535]] in [[introduced in 1954|1954]].
 
At the time it was called Type 53D.
It was briefly renamed 53D/54D in 1955 with the introduction of the [[541]] and [[545]].  This quickly changed to 53/54D, and finally shortened to just "D" in 1959 with the introduction of the 5xxA scopes.
Its final year in the catalog was 1968; it had been superseded by Type [[W]] and then [[1A6]].
 
[[K]], [[L]], and [[T]] are tied for longest production life, at 16 years.
[[B]], [[D]], and [[G]] are next at 15 years.
 
[[Lavoie Laboratories]] produced an unauthorized clone, the [[Lavoie LA-265-D]].
 
==Internals==
Early production used a pair of [[5814]] tubes at the input while late used [[12AU7]]'s.
These two tube types have different heater currents, and because the heaters are
series-wired, you cannot switch from one type to the other without circuit modification.
 
==Specifications==
[[Category:Specifications needed]] ''please add''
 
==Pictures==
 
<gallery>
 
D.jpeg
D 1.JPG|Front
D 1.JPG.JPG| Chassis
D 3.JPG| Rubber support for elimination of microphonics
D 4.JPG| Chassis bottom
Tek d early schem.png|Early Schematic
Tek d late schem.png|Late Schematic
Tek d late attenuators.png|Late Attenuators
Tek type d front.jpg|Front View (vertical position knob not original)
</gallery>
 
[[Category:500 series plugins]]
[[Category:Differential amplifiers]]

Revision as of 14:50, 1 March 2021

Template:Plugin Sidebar 2

The Tektronix Type D is a differential amplifier plug-in for 500-series scopes.

Type D was the most sensitive plug-in of the original four. The bandwidth depends on the gain, ranging from 2 MHz at 50 mV/div to 300 kHz at 1 mV/div. There are two axes of sensitivity setting: a decade attenuator in front of a gain switch. This scheme would be reprised in Type W.

It displays the difference between two input signals, with a common-mode rejection ratio of 10,000. It has six tubes, on a shock-mounted subchassis to avoid microphonics.

Along with Types A, B, and C, Type D was introduced with the 531 and 535 in 1954.

At the time it was called Type 53D. It was briefly renamed 53D/54D in 1955 with the introduction of the 541 and 545. This quickly changed to 53/54D, and finally shortened to just "D" in 1959 with the introduction of the 5xxA scopes. Its final year in the catalog was 1968; it had been superseded by Type W and then 1A6.

K, L, and T are tied for longest production life, at 16 years. B, D, and G are next at 15 years.

Lavoie Laboratories produced an unauthorized clone, the Lavoie LA-265-D.

Internals

Early production used a pair of 5814 tubes at the input while late used 12AU7's. These two tube types have different heater currents, and because the heaters are series-wired, you cannot switch from one type to the other without circuit modification.

Specifications

please add

Pictures