DM502: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(21 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{TM500 | mfg=Tektronix | type=DM502 | function=basic digital multimeter | class=multimeter | image=Tek dm502 e1.jpg | introduced=1975 | discontinued=1988 |
{{TM500 | mfg=Tektronix | type=DM502 | function=basic 3½ digit digital multimeter | class=multimeter | image=Tek dm502 e1.jpg | introduced=1975 | discontinued=1988 |
manuals=
designers= |manuals=
* [http://w140.com/tek_dm502.pdf Tektronix DM502 Manual (PDF)]
* [[Media:070-1726-00.pdf|Tektronix DM502 Manual]]
* [http://w140.com/smb/DM502A_SM.pdf Tektronix DM502A Manual (OCR, PDF)]
* [[Media:070-2693-00.pdf|Tektronix DM502A Manual]] (OCR)
}}
}}
It has an Int/Ext switch that allows alternate input connections via the rear interface to be selected.


The DM502A model added a temperature input for the [[P6601]] probe.
The DM502 is available with an input for temperature measurement with a transistor temperature probe ([[P6430]]) using an NPN transistor, e.g. a 2N2484 (any NPN-Transistor with h<sub>FE</sub> >150 can be used).


{{MissingSpecs}}
The DM502'''A''' model adds an input for a PT-100 temperature probe ([[P6601]]),
a True RMS converter, and offset circuits to read dB directly in all ranges.
An "Option 2" instrument deletes the temperature measurement function, P6601 temperature probe,
and all internal circuits associated with this function.
The rear interface of DM502'''A''' is limited compared to the DM502:
No current input and no reading output, see gallery below.
 
The 2 kΩ measurement range (+HI in DM502A) can be used for diode testing, since
a current source of 1 mA is active and the reading corresponds to the (forward)
voltage drop of the diode in Volts. The voltage can rise to a maximum of 10 V.
A second voltmeter is needed to measure the voltage if 2 V are exceeded.
 
{{BeginSpecs}}
{{Spec | Voltage ranges | 200 mV to 200 V in decade steps; 1 kV (DC) / 500 V (AC) top range}}
{{Spec | Input impedance DM502 | 10 MΩ or direct JFET input >2 GΩ  (by internal jumper) }}
{{Spec | Input impedance DM502A | 10 MΩ}}
{{Spec | Current ranges | 200 μA to 2 A in decade steps }}
{{Spec | Resistance ranges | 200 Ω to 20 MΩ in decade steps }}
{{EndSpecs}}
 
==Links==
* [https://www.youtube.com/watch?v=Tx6DtLooCOs Tektronix DM502 Multimeter Repair] by NFM @ YouTube
* [https://youtu.be/BA6o05Vzzao  Tektronix DM502A The final Restoration] by Zenwizard Studios @ YouTube
* [https://www.youtube.com/watch?v=9UI41WekZIs  Tektronix DM502A Lab Check In and Calibration] by Zenwizard Studios @ YouTube


==Pictures==
==Pictures==
===DM502===
<gallery>
Tek dm502 e1.jpg
Tek dm502 front.jpg
Tek dm502 left.jpg
DM502_switch_inside.jpg|DM502 switch with cover off.  The cover removes easily using a Pozidrive screwdriver.
Tek dm502 right.jpg
Tek dm502 leftfront.jpg
Tek dm502 leftrear.jpg
Tek dm502 rightfront.jpg
Tek dm502 rightrear.jpg
DM502_rear_con.JPG|DM502 rear interface
</gallery>


===DM502A===
<gallery>
<gallery>
Tek dm502 e1.jpg|DM502
Tek-dm502a-f.jpg
Tek dm502 front.jpg|DM502
Tek dm502a 1.jpg
Tek dm502 left.jpg|DM502
Tek dm502a 2.jpg
Tek dm502 right.jpg|DM502
Tek dm502 leftfront.jpg|DM502
Tek dm502 leftrear.jpg|DM502
Tek dm502 rightfront.jpg|DM502
Tek dm502 rightrear.jpg|DM502
Tek dm502a 1.jpg|DM502A
Tek dm502a 2.jpg|DM502A
Tek dm502a right internal.jpg|DM502A right internal
Tek dm502a right internal.jpg|DM502A right internal
Tek-DM502A-rear-interface.jpg|DM502A rear interface
</gallery>
</gallery>
[[Category:Specifications needed]]


[[Category:TM500 multimeter plugins]]
[[Category:TM500 multimeter plugins]]
[[Category:Introduced in 1975]]
[[Category:Introduced in 1975]]

Revision as of 08:53, 12 February 2023

Tektronix DM502
basic 3½ digit digital multimeter
Tektronix DM502

Produced from 1975 to 1988

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix DM502 is a basic 3½ digit digital multimeter plug-in for the TM500 system.

It has an Int/Ext switch that allows alternate input connections via the rear interface to be selected.

The DM502 is available with an input for temperature measurement with a transistor temperature probe (P6430) using an NPN transistor, e.g. a 2N2484 (any NPN-Transistor with hFE >150 can be used).

The DM502A model adds an input for a PT-100 temperature probe (P6601), a True RMS converter, and offset circuits to read dB directly in all ranges. An "Option 2" instrument deletes the temperature measurement function, P6601 temperature probe, and all internal circuits associated with this function. The rear interface of DM502A is limited compared to the DM502: No current input and no reading output, see gallery below.

The 2 kΩ measurement range (+HI in DM502A) can be used for diode testing, since a current source of 1 mA is active and the reading corresponds to the (forward) voltage drop of the diode in Volts. The voltage can rise to a maximum of 10 V. A second voltmeter is needed to measure the voltage if 2 V are exceeded.

Key Specifications

Voltage ranges 200 mV to 200 V in decade steps; 1 kV (DC) / 500 V (AC) top range
Input impedance DM502 10 MΩ or direct JFET input >2 GΩ (by internal jumper)
Input impedance DM502A 10 MΩ
Current ranges 200 μA to 2 A in decade steps
Resistance ranges 200 Ω to 20 MΩ in decade steps

Links

Pictures

DM502

DM502A