G: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:


Its name changed twice.  Type 53G was [[introduced in 1955|introduced in March 1955]] along with the
Its name changed twice.  Type 53G was [[introduced in 1955|introduced in March 1955]] along with the
[[541]]/[[545]], but it was only spec'ed to 10MHz in a [[535]], and its
[[541]]/[[545]], but it was only specified to 10MHz in a [[535]], and its
performance in a fast mainframe was not documented.  When the mainframe cabinet styles
performance in a fast mainframe was not documented.  When the mainframe cabinet styles
were revamped in August 1956, the Types 53[[A]], 53[[B]], 53[[C]] and 53G were
were revamped in August 1956, the Types 53[[A]], 53[[B]], 53[[C]] and 53G were
all upgraded (sped up) and renamed; Type 53G became Type 53/54G.  It was the only
all upgraded (sped up) and renamed; Type 53G became Type 53/54G.  It was the only
early plugin that did not go through the awkward "53x/54x" phase.
early plug-in that did not go through the awkward "53x/54x" phase.
In 1959 it became Type G with no further change in design.  It was dropped after 1970.
In 1959 it became Type G with no further change in design.  It was dropped after 1970.


Line 16: Line 16:
where the Gain vernier is not concentric with the step attenuator.
where the Gain vernier is not concentric with the step attenuator.


* http://w140.com/tek_fcp/tek_type_g_factory_cal_proc.pdf
* [http://w140.com/tek_g.pdf Tektronix Type G Manual (PDF)]
* http://w140.com/tek_g.pdf
* [http://w140.com/tek_fcp/tek_type_g_factory_cal_proc.pdf Tektronix Type G Factory Calibration Procedure (PDF)]

Revision as of 16:29, 6 March 2011

The Tektronix Type G is a plug-in differential amplifier for 500-series scopes.

Unlike Type D, Type G is optimized for RF, achieving only a 100 to 1 common-mode rejection ratio but operating all the way to 20MHz. Its maximum sensitivity is 50mV/div. It has seven tubes.

Its name changed twice. Type 53G was introduced in March 1955 along with the 541/545, but it was only specified to 10MHz in a 535, and its performance in a fast mainframe was not documented. When the mainframe cabinet styles were revamped in August 1956, the Types 53A, 53B, 53C and 53G were all upgraded (sped up) and renamed; Type 53G became Type 53/54G. It was the only early plug-in that did not go through the awkward "53x/54x" phase. In 1959 it became Type G with no further change in design. It was dropped after 1970.

Types G and K are the only letter-series plugins where the Gain vernier is not concentric with the step attenuator.